RECOM REDIN120 and REDIN240 DIN rail power supplies
RECOM has added DIN rail power supplies rated at 120 and 240 W to its existing range. The series supports brief peaks of 50% above rating and the modules can be connected in parallel to increase the output power available or for redundancy.
The modules operate at input voltages ranging from 85 to 264 VAC for worldwide usage and are equipped with an active PFC circuit for a power factor >0.95. The REDIN120 is available with output voltages of 12, 24 or 48 VDC, while the more powerful REDIN240 supplies 24 or 48 VDC. Both modules are isolated at 3 kVAC/min between input and output and are capable of high efficiency values of up to 94.3%.
The modules run at operating temperatures ranging from -25 to +70°C, with nominal output available up to +60°C, and switch off automatically to protect the system if the maximum permissible temperature is exceeded or in case of overvoltage, overload and short-circuit. In addition to the standard red and green LED indicators, a floating relay contact generates a ‘power good’ signal.
The models feature a robust metal casing for back and side mounting on a DIN rail; side mounting is especially beneficial in switch cabinets with low installation depths. REDIN120 is very slim at 33 mm and REDIN240 is only marginally wider at 46 mm.
Both modules are certified according to UL508, UL60950-1 and IEC/EN 60950-1, and comply with EN 55022/55024 EMC Class B standards.
For more information, click here.
Phone: 0011 65 6276 8795
The XJTAG software for PADS schematic design significantly increases the design for test and...
The Maxim MAXREFDES143# embedded security reference design provides protection against...
The Infineon Technologies TLE984x LIN-based relay driver ICs bring together the ARM Cortex-M0...