Panel meter

Tuesday, 18 March, 2003 | Supplied by: Control Devices Australia


The Ditel Gamma-M is designed to accept signals from load cells, pressure transmitters, potentiometers etc, to measure weight, load, torque, pressure or displacement. With an external shunt, the Gamma-M can also read DC current.

The meter offers two scaling methods, manual and teach, along with user selectable filters and configurable last digit resolution that makes the device suitable for any input signal. Logical functions include reset, hold, tare and peak/valley.

Standard features include ±9999 display and a sample rate greater than 500 samples per second, direct access to setpoint programming, 31 user selectable remote logic functions and signal linearisation for up to 11 segments.

Four transducer supply voltages are included. The Gamma-M also accepts Modbus RTU protocol.

Online: www.controldevices.com.au
Phone: 02 9330 1700
Related Products

STMicroelectronics X-CUBE-UCSI USB Type-C connector system interface library

STMicroelectronics has added a USB Type-C connector system interface (UCSI) library in the...

VIAVI CX700 ComXpert radio test system

The VIAVI CX700 ComXpert radio test system is designed to deliver all-in-one, high-performance...

ICP Electronics DAS DNM-843VI-800V voltage attenuator

The ICP DAS DNM-843VI-800V is a 3-channel voltage attenuator that is designed to measure...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd