Prodigit Electronics 3310F series programmable DC electronics load

Tuesday, 08 March, 2016 | Supplied by: Triplepoint Calibrations Pty Ltd


Prodigit Electronics has announced the 3310F series programmable DC electronics loads.

The electronics load module is designed to test, evaluate and burn-in for DC power supplies and batteries. Each module has its own control and display panel, CC/CR/CV/CP/dynamic modes and 150 sets of store/recall memory, which provides load set-up efficiently.

Dynamic set can be simulated under CC or CP mode. The current rise/fall slew rate can be adjusted individually and there is an external signal input so that load can have a simulated arbitrary waveform. Programmable load ON/OFF voltage, GO/NG meter check and voltage meter display is selectable for different applications.

The series can serve applications such as voltage/current sources, SMPS transient response, current limit testing, battery emulation, battery chargers, ATE systems, etc.

Online: www.triplepoint.com.au
Phone: 08 8346 4424
Related Products

STMicroelectronics X-CUBE-UCSI USB Type-C connector system interface library

STMicroelectronics has added a USB Type-C connector system interface (UCSI) library in the...

VIAVI CX700 ComXpert radio test system

The VIAVI CX700 ComXpert radio test system is designed to deliver all-in-one, high-performance...

ICP Electronics DAS DNM-843VI-800V voltage attenuator

The ICP DAS DNM-843VI-800V is a 3-channel voltage attenuator that is designed to measure...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd