Protocol developed for piezoelectric energy harvesters
16 March, 2023Scientists from Bath University have developed a 'best practice' protocol for creating and evaluating piezoelectric materials.
R&S ZNB43 vector network analyser
11 July, 2022The product is available in 2- and 4-port models, with two connector types (either 2.4 or 2.92 mm). It optionally offers an extended power range and a second internal source.
VIAVI Xgig Protocol Exerciser for PCIe 5.0 traffic validation
08 December, 2020The product enables in-depth protocol evaluation and debugging at 32 Gbps per lane, as well as testing for PCIe compliance, allowing development of network technologies to meet the demands of tomorrow's high-speed, high-performance computing applications.
VIAVI Xgig 5P16 Protocol Analyzer
02 October, 2020VIAVI Solutions has introduced a 16-lane protocol analysis system for PCI Express 5.0, operating at 32 Gbps per lane.
VIAVI Solutions Xgig 5P8 Analyzer Platform for PCIe 5.0
05 August, 2020VIAVI Solutions has introduced the Xgig 5P8 Analyzer Platform for PCIe 5.0, allowing equipment manufacturers to ensure performance in accordance with the latest revision of the ubiquitous serial computer expansion bus standard.
Anritsu MT8000A Test Platform for 5G NR RF & Protocol Test
01 February, 2019Anritsu has released its MT8000A solution with a 5G base station emulation function. The product supports 5G NR RF Tx measurements and protocol tests needed to support advances in communications technologies in line with the development of 5G NR.
Copper Mountain Technologies Cobalt C2220 vector network analyser
12 October, 2017Copper Mountain Technologies' C2220 2-port vector network analyser operates in the frequency range of 100 kHz to 20 GHz and adds direct receiver access for special applications involving external directional coupling, including load pull and high power measurements.
Copper Mountain Technologies C2209 Cobalt vector network analyser
19 September, 2017Copper Mountain Technologies' C2209 2-port analyser operates in the frequency range of 100 kHz to 9 GHz. The product offers a typical dynamic range of 162 dB (1 Hz IF BW) and sweep speeds as low as 10 µs per point.
Tektronix TTR500 Series vector network analyser (VNA)
28 June, 2017Tektronix's TTR500 Series vector network analyser (VNA) features a 122 dB dynamic range and 6 GHz frequency range. It also includes VectorVu-PC analysis software and what is claimed to be the only built-in bias tee for testing active devices in this category.
Waveguide calibration with a vector network analyser
21 April, 2016When measuring the performance of waveguide components with a vector network analyser, non-idealities of any uncalibrated VNA introduce uncertainty in the measurement results.
MegiQ VNA0440 4 GHz PC-based VNA
05 June, 2015The MegiQ VNA0440 is a compact USB-driven vector network analyser (VNA) manufactured in the Netherlands. The bidirectional, 2-port VNA allows detailed impedance measurements of antennas, components and circuits covering 400 to 4000 MHz.
Anritsu Performance ShockLine MS46500B series of high-performance vector network analysers
29 May, 2015Anritsu expands its ShockLine family of vector network analysers with the introduction of the Performance ShockLine MS46500B series. Delivering a high level of value and performance, including high dynamic range and maximum output power, the series is said to lower the cost of test in applications up to 8.5 GHz.
Nordic Semiconductor S130 SoftDevice Bluetooth Smart protocol stack
26 July, 2014Nordic Semiconductor has launched the S130 SoftDevice - a Bluetooth Smart protocol stack which allows the development of Nordic nRF51 Series SoC-based advanced wearable Bluetooth Smart hub network topologies that don't always need a smartphone present to operate.
National Instruments PXIe-1491 digital audio and video analyser
30 January, 2013National Instruments has announced the company’s latest multimedia test offering, the NI PXIe-1491 digital audio and video analyser for HDMI, DVI and mobile devices.
Nordic Semiconductor nRF51 series evaluation kit
08 October, 2012The kit allows the prototyping and initial development of ULP wireless product applications.
