OKW flush-mount Interface-Terminal enclosures

Click2Contact

OKW has extended its Interface-Terminal plastic enclosures series with a new range of accessory kits which allow the enclosures to be flush-fitted in walls or control panels.

The new wall/panel installation kits consist of four holding brackets that are fitted to the rear of the enclosure and are used to mount the assembly in the wall/panel aperture. A flush-fitting design frame then snaps onto the holding brackets to give an attractive and professional appearance which hides the aperture and assembly screws underneath.

These kits are suitable for applications where there are high architectural standards or in historically important buildings where concealing electronics equipment is important.

To assist with this, OKW offers the installation kits in three options: in off-white to match the standard enclosure colour; painted to match the building colour scheme; or with water transfer printing, eg, with wood finish to suit an historical building or traditional office decor.

These installation kits are designed for the basic Interface-Terminal enclosure configurations, consisting of a flat- or high-bottom part fitted with any of the front panel/cover options. The basic enclosures are available in three standard plan sizes of 135 x 190, 165 x 225 and 195 x 275 mm. Heights vary from 26.5 mm to 46.5 mm depending on the bottom/front section configuration selected.

In addition to the frame finishes, OKW can also supply the enclosures with additional holes for the push-buttons, connectors and displays, plus silk-screen printed legends and logos, and EMC shielding.