iEi WAFER-BT-E38001W2 single-board computer

Wednesday, 22 September, 2021 | Supplied by: ICP Electronics Australia Pty Ltd

iEi WAFER-BT-E38001W2 single-board computer

iEi’s WAFER-BT-E38001W2 is a 3.5″ single-board computer with an Intel 22 nm Atom SoC. The SBC supports 4 GB solder-down 1066/1333 MHz DDR3L memory and an Intel HD Graphics Gen 7 Engine with four execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2.

In terms of external I/O interface, the product includes 1 x RS-232, 1 x USB 2.0 and 1 x USB 3.2 Gen 1. The internal I/O interface is inclusive of 1 x PS/2 KB/MS, 1 x RS-232, 4 x USB 2.0, 1 x RS-422/485 and 2 x SATA 3 Gbps. The device facilitates a dual independent display (1 x VGA, 1 x 18-/24-bit dual-channel LVDS and 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP).

Additionally, the computer has 2 x LAN and 12 VDC input for power. It can survive in tough conditions as it can operate in a wide range of operating temperatures, from -40 to +85°C.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

Quectel HCM511S MCU Bluetooth module

The Quectel HCM511S MCU Bluetooth module features enhanced receiver sensitivity and a maximum...

ADLINK cExpress-ASL COM express module

The ADLINK cExpress-ASL COM express module is integrated with Intel UHD graphics with up to 32...

Sensirion SFC6000D mass flow controller

The Sensirion SFC6000D mass flow controller is designed to be small and light, thereby allowing...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd