STMicroelectronics SPBTLE-1S Bluetooth Low Energy (BLE) module

Wednesday, 13 September, 2017 | Supplied by: STMicroelectronics Pty Ltd

STMicroelectronics SPBTLE-1S Bluetooth Low Energy (BLE) module

To help product innovators streamline prototyping and development of connected smart objects, STMicroelectronics’ SPBTLE-1S ready-to-use Bluetooth Low Energy (BLE) module integrates all the components needed to complete the radio subsystem. The BLE module integrates ST’s BlueNRG-1 application-processor system-on-chip (SoC) and balun, high-frequency oscillators, and a chip antenna among others.

Developers can use the module to bypass hardware-design and RF-circuit layout challenges. The SPBTLE-1S is BQE-approved and FCC, IC and CE-RED (Radio Equipment Directive) certified to simplify end-product approval for North America and EU markets. ST’s Bluetooth 4.2 certified BLE protocol stack is included, and the supporting software-development kit (SDK) contains a wide range of Bluetooth profiles and sample application code.

Coming in a space-efficient 11.5 x 13.5 mm profile, and with a wide supply-voltage range of 1.7–3.6 V, the module is suitable for small, battery-operated objects powered by various types of sources such as a primary button cell or rechargeable Li-ion battery. High RF output power of +5 dBm and good receiver sensitivity help to maximise communication range.

The SoC at the heart of the module implements the complete BLE physical layer (PHY), link layer and network/application-processing engine comprising a low-power ARM Cortex-M0 core with 160 KB Flash, 24 KB RAM with data retention, and a security co-processor. The SoC also implements smart power management, with a DC/DC converter capable of powering the module to ensure optimum energy efficiency.

Users can leverage an extensive set of interfaces, including a UART, two I²C ports, SPI port, single-wire debug and 14 GPIOs, as well as peripherals including two multifunction timers, a 10-bit ADC, watchdog timer and real-time clock, a DMA controller and a PDM stream processor interface, which is suitable for developing voice-controlled applications.

For more information, click here.

Online: www.st.com
Phone: 02 9158 7200
Related Products

ADLINK cExpress-ASL COM express module

The ADLINK cExpress-ASL COM express module is integrated with Intel UHD graphics with up to 32...

HYDAC EDS 3300 pressure switch

The HYDAC EDS 3300 pressure switch features an integrated digital display for relative pressure...

Sensirion SFC6000D mass flow controller

The Sensirion SFC6000D mass flow controller is designed to be small and light, thereby allowing...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd