Access point module

Thursday, 17 September, 2009 | Supplied by: Future Electronics


The 610wi is an 802.11 b/g WLAN access point module in a pin-head-type package. Serial to WLAN can be implemented with any system that has a UART interface.

Development time is reduced because WLAN driver porting is not required and the module guarantees good stability as a result of independent operation.

The module provides ethernet-to-wireless bridging, enabling a wired network device to have a wireless communication interface. It also offers a serial interface for serial to wireless applications and offers an AP/station/gateway model.

The device offers a 54 Mbps data rate and a maximum 20 Mbps effective data transmission rate. The module includes a full-features network protocol stack and a built-in web server for configuration via a standard web browser.

The WIZ610wi-EVB allows full evaluation of the module via standard serial interface or ethernet connection.

Online: www.futureelectronics.com
Phone: 02 8064 0000
Related Products

maxon motor EPOS4 DC motor position controller

With tiny dimensions of 60 x 62 mm and able to drive both brushed and brushless DC motors up to...

EPCOS PTC Thermistors data book

TDK Corporation presents the fully revised data book for EPCOS PTC thermistors, which introduces...

Microstar Laboratories Data Acquisition Processor (DAP) boards

Microstar Laboratories produces a line of Data Acquisition Processor (DAP) boards, each with an...


  • All content Copyright © 2016 Westwick-Farrow Pty Ltd