STMicroelectronics L4985A/B and L4986A/B power-factor correction (PFC) boost converters

Click2Contact

STMicroelectronics’ L4985A/B and L4986A/B power-factor correction (PFC) boost converters are designed to enhance flexibility by integrating 800 V start-up circuitry and additional valuable proprietary features. The built-in, high-voltage, start-up capability saves auxiliary circuitry, allowing a ‘no aux’ design that reduces bill-of-materials costs. These circuits also include internal logic to safely discharge input-filter X capacitors when the AC line is disconnected. This eliminates the power losses incurred in a traditional discharge resistor and simplifies meeting safety regulations such as IEC 61010-1 or IEC 62368-1.

The converters suit multiple applications as PFC pre-regulators in equipment that must meet requirements for harmonic distortion, such as IEC 61000-3-2 and equivalents. These include power supplies for desktop PCs, servers, game consoles and televisions, industrial and medical switched-mode power supplies (SMPS), and e-scooter chargers. By integrating a proprietary multiplier emulator, as well as dedicated circuitry to minimise total harmonic distortion (THD) in all operating conditions, the converters also provide consistent power quality for LED luminaires.

The converters benefit from a proprietary off-time modulator that further simplifies design by providing quasi fixed-frequency operation in all load conditions, entering burst mode at light load and zero load. The L4985A and L4986A operate at 65 kHz, while the L4985B and L4986B are designed for 130 kHz operation. The L4986A/B variants have additional power-good input and output pins that generate a logic signal to aid system management when the PFC output reaches a user-determined threshold. To permit power-saving design, all variants feature an external pin to initiate idle mode with low power consumption.

Comprehensive protection and monitoring are also built in, including overvoltage protection and protection against feedback loop failures, erroneous settings and boost-inductor saturation. Soft-start limits inrush current and helps maintain output-voltage regulation, while brown-out/brown-in detection is designed to provide reliable starting under all AC-line conditions and prevents excessive RMS current. The brownout protection enables medical equipment to meet IEC 60601-1-2, which requires output regulation to be maintained if the line voltage slumps for up to 500 ms.

Engineers can accelerate their projects using the EVL400W-80PL evaluation board, a complete AC/DC power supply certified 80PLUS Platinum Level by CLEAResult. Reaching 90.2% efficiency at full load and 92.49% at 50% load, the EVL400W-80PL combines the L4985 PFC controller with ST’s L6699D resonant controller and SRK2001 synchronous rectifier controller. All L4985 and L4986 variants are in production. The L4985A/B are packaged as SO-8 devices, while the L4986A/B with additional power-good pins are housed in SSOP-10.