Hammond 1553W IP65 sealed version of handheld enclosure
16 April, 2015 | Supplied by: Hammond Electronics Pty LtdThe 1553W IP65 sealed version of the ergonomically designed 1553 handheld enclosure family, from Hammond Electronics, is intended for housing any electronics that will be used in environments where dust and water are likely to be present.
STANLEY Engineered Fastening Spiralock micro threaded inserts
07 April, 2015 | Supplied by: STANLEY Engineered FasteningElectronics engineers now have access to enhanced electronics performance - including fastener resistance to vibrational loosening, drop shock and high heat - due to the self-locking Spiralock internal thread form design in micro threaded inserts.
OKW Interface-Terminal iPad Air front panels
30 March, 2015 | Supplied by: ROLEC OKW Australia New Zealand P/L
OKW has added two iPad Air front panels to its Interface-Terminal multifunction electronic enclosures range, enabling the tablets to be securely mounted to walls or desks or in a robust, handheld enclosure to help prevent damage or even theft.
Advanced Thermal Solutions zipper fin heat sinks
26 March, 2015 | Supplied by: Digi-Key ElectronicsZipper fin heat sinks from Advanced Thermal Solutions (ATS) protect components from the dangers of excess heat.
Molex SolderRight direct-solder terminals
25 March, 2015 | Supplied by: Molex Premise Networks Pty LtdSuitable for tight packaging constraints, low-profile SolderRight direct-solder terminals enable right-angle connections onto a PCB. The product enables soldering in a world where electronic systems, products and packaging are becoming smaller.
Texas Instruments C2000 Piccolo LaunchPad LAUNCHXL-F28069M development board
20 March, 2015 | Supplied by: element14Texas Instruments' C2000 Piccolo LaunchPad, LAUNCHXL-F28069M, is a full development board for Piccolo F2806x devices and InstaSPIN technology.
NXP 74AUP2Gx series dual PCB configurable device
19 March, 2015 | Supplied by: Digi-Key ElectronicsThe NXP dual PCB configurable device is a multigate, multifunction logic device with Schmitt-trigger inputs. Each device contains two configurable gates that can be individually configured into one of seven different functions per device.
The case for solderless assembly
20 February, 2015
Elimination of solder from electronic circuit assembly has been suggested as one way to avoid solder's many shortcomings. In the article below, Joe Fjelstad* makes the case for solderless assembly.
The case for solderless assembly
20 February, 2015 | Supplied by: Bishop & AssociatesElimination of solder from electronic circuit assembly has been suggested as one way to avoid solder's many shortcomings. In the article below, Joe Fjelstad* makes the case for solderless assembly.
Hammond Electronics 1593HAMEGG bareboard computer enclosures
29 January, 2015 | Supplied by: Hammond Electronics Pty LtdHammond Electronics has announced its 1593HAMEGG enclosures - board-specific designs for the Arduino and Raspberry Pi bareboard computers. Available in translucent blue, translucent purple or translucent black, they have been designed in response to user feedback.
OKW Datec-Compact S and L handheld enclosures
27 January, 2015 | Supplied by: ROLEC OKW Australia New Zealand P/LOKW has completed its range of Datec-Compact outdoor handheld enclosures by adding sizes S and L to the existing M models. The units have been designed for mobile applications in harsh environments, including data recording and transfer; measuring and control; and stock and sales logging.
Analog Devices AD6655-150EBZ evaluation board for IF diversity receiver
21 December, 2014 | Supplied by: RSThe AD6655-150EBZ evaluation board, from Analog Devices, is designed for evaluation of the AD6655 - a mixed-signal intermediate frequency (IF) diversity receiver with integrated dual, 14-bit, 150 MSPS ADC.
Terasic DE0-Nano development and education board for Cyclone IV FPGA
17 December, 2014 | Supplied by: Digi-Key ElectronicsThe DE0-Nano board introduces a compact-sized FPGA development platform, suitable for prototyping circuit designs such as robots and portable projects. The board is designed to be used in simple implementation, targeting the Cyclone IV device up to 22,320 LEs.
Mouser announces expanded partnership with Hittite
12 December, 2014 | Supplied by: Mouser ElectronicsMouser Electronics, Inc has expanded its strategic partnership and worldwide distribution agreement with Analog Devices (ADI) to include ADI's recently acquired RF and microwave products from Hittite Microwave.
Cree KIT8020CRD8FF1217P-1 SiC MOSFET evaluation kit
03 December, 2014 | Supplied by: Wireless ComponentsCree has released the KIT8020CRD8FF1217P-1, a SiC MOSFET evaluation kit. It is used to demonstrate the high performance of the company's 1200 V SiC MOSFETs and SiC Schottky diodes.
