Flash testing of PCBs during the initial production stages
10 December, 2012PCB manufacturers can take advantage of a fast, reliable and safe solution to meet the growing demand for flash/HIPOT tested (2 kV) unpopulated boards. Electrical safety testing specialist Clare has developed a bespoke system using its HAL104 instrument connected to a test enclosure, which enables the easy flash testing of PCBs during the initial production stages.
Michell Instruments DT722 RH and temperature transmitter
07 December, 2012Maintaining reliable relative humidity (RH) measurements in harsh or corrosive environments is notoriously difficult as the conditions themselves degrade the sensors and equipment, often in short time periods. Michell Instruments’ DT722 RH and temperature transmitter provides a solution to this problem.
Power Parameters UNI-T handheld digital oscilloscope and multimeter
03 December, 2012Mecmesin Vortex-I PC-controlled torque tester
29 November, 2012The Mecmesin Vortex-I PC-controlled torque tester brings quality control measurement straight to the point of manufacture. The machine’s simple set-up means manufacturers can test clockwise and counterclockwise torques of packaging components, such as the application and release torque of screw closures.
Tetrahertz spectrometer delivered to UC
29 November, 2012The Infrared Laboratory for Novel Infrared and Magnetic Materials at the University of California, San Diego has taken delivery of a tetrahertz spectrometer to facilitate its research into electromagnetic materials, semiconductors and superconductivity.
Narda Safety Test Solutions PMM7010 precompliant EMI test receiver
18 October, 2012The PMM7010 resolves emission problems, especially those evident during a product development cycle.
National Instruments WSN-3214 strain node and 9232 C series module
16 October, 2012National Instruments has announced the NI WSN-3214 strain node and the NI 9232 C Series module, which are intended to help engineers monitor machines, heavy equipment and ageing infrastructure.
Dytran models 3225M36 and 3225M37 ultraminiature teardrop accelerometers
10 October, 2012These IEPE accelerometers are designed for mounting in spaces typically inaccessible to accelerometers.
Saelig BT-168D compact universal battery tester
09 October, 2012The BT-168D battery tester tests 9 V MN1604, AAA, AA, C and D type batteries and even miniature coin and button cells.
New femtosecond technique enables insulator classification
05 October, 2012Till now it has been impossible to distinctly classify all insulators due to a lack of suitable experimental approaches.
Developing tools for testing and troubleshooting SMDs
05 October, 2012Smart Tweezers will test and troubleshoot surface mount devices on printed circuit boards.
JTAG Technologies DataBlaster JT 37x7/PXIe boundary-scan controller
28 September, 2012JTAG Technologies’ DataBlaster JT 37x7/PXIe is a high-performance boundary-scan IEEE Std. 1149.1 controller.
DEWE2 data acquisition systems
25 September, 2012Simultaneous sampling Trion plug-in modules combine the modularity of PXI with a larger front panel.
Rohde & Schwarz ESR EMI test receiver
20 September, 2012Conducted and radiated EMI acceptance testing in line with EN/CISPR/FCC.
Comtest Laboratories LCP testing for the VEET Scheme
14 September, 2012Comtest has implemented a test facility to measure the lamp circuit power (LCP) of lighting devices as detailed in the VEET Explanatory Note for Commercial Lighting. Testing will be performed in a controlled environment for emerging and non-emerging lighting technologies.
