Multiple milestones for Mars missions
03 December, 2018 by Lauren DavisNASA's latest mission to Mars has reached a major milestone, with the 'InSight' lander touching down on the red planet on 27 November at around 7 am AEDT.
Noise XT NXA phase noise analyser
30 November, 2018 | Supplied by: Scientific Devices AustraliaNoise XT has released the NXA Series fully automated phase noise analyser, which has a frequency range from 2 MHz to 6, 26 or 50 GHz.
Teledyne LeCroy T3SP series differential time-domain reflectometers
28 November, 2018 | Supplied by: Scientific Devices AustraliaTeledyne LeCroy has released the T3SP series differential time-domain reflectometers. The Model T3SP10D (10 GHz) and Model T3SP15D (15 GHz) stimulate the DUT with true differential signals.
Teledyne LeCroy Model T3AWG3252 and Model T3AWG3352 arbitrary waveform generators
26 November, 2018 | Supplied by: Scientific Devices AustraliaThe Model T3AWG3252 and Model T3AWG3352 high-definition, high-performance arbitrary waveform generators consist of two channels, 16-bit vertical resolution, 6 Vpp (optional 12 Vpp) max output voltage (50Ω), 128 Mpts/ch memory (optional 1 Gpts/ch), a maximum sampling rate of 1.2 GS/s and a sinewave frequency output of 250 MHz and 350 MHz respectively.
Tektronix AFG31000 Arbitrary Function Generator
14 November, 2018 | Supplied by: element14The Tektronix AFG31000 Arbitrary Function Generator is a waveform generation platform designed for the demanding expectations on performance and versatility throughout the whole process of product realisation.
R&S Spectrum Rider FPH handheld microwave spectrum analysers
01 November, 2018 | Supplied by: Rohde & Schwarz (Australia) Pty LtdRohde & Schwarz has expanded its R&S Spectrum Rider FPH family with three more base models providing frequency ranges from 5 kHz to 6, 13.6 and 26.5 GHz.
Rover HD Tab 7 Lite Tablet Analyser
01 November, 2018 | Supplied by: TechRentalsThe Rover HD Tab 7 Lite is a tablet analyser used for the installation, maintenance and commissioning of terrestrial, satellite and DVB T/C/S/S2 cable TV systems.
Moore Industries HES HART to Ethernet Gateway System
16 October, 2018 | Supplied by: Moore IndustriesThe HES HART to Ethernet Gateway System, from Moore Industries, converts signals from up to 64 wired HART devices to Ethernet MODBUS/TCP and HART-IP.
Digitiser and AWG used for acoustic wave research
09 October, 2018 | Supplied by: TRIO Test & MeasurementThe Acoustics Research Group at Brigham Young University is researching the use of time reversal signal processing to focus soundwaves with high amplitudes in a room.
Anritsu MP2110A sampling oscilloscope for 53 Gbaud PAM4 optical signal analysis
01 October, 2018 | Supplied by: Anritsu Pty LtdAnritsu has announced a 53 Gbaud PAM4 analysis function for the company's MP2110A BERTWave sampling oscilloscope targeted at production and inspection of optical modules.
HT I-Ve Solar Tester
01 September, 2018 | Supplied by: TechRentalsThe HT I-Ve Solar Tester is designed to measure the efficiency of single-phase photovoltaic systems and verify the I-V curve of a module or a string.
Keysight N9311X-100 close field probe set
03 August, 2018 | Supplied by: Keysight Technologies Australia Pty LtdThe N9311X-100 close field probe set contains four different H-field near-field probes that cover frequencies from 30 MHz to 3 GHz. Near-field probes are useful in the early R&D stage to evaluate or troubleshoot EMI emissions and avoid rework later.
Anritsu MS269xA Series Signal Analyzer now supporting 5G NR Analysis
01 August, 2018 | Supplied by: Anritsu Pty LtdAnritsu has announced that the MS269xA series signal analysers now support measurements of RF Tx characteristics of 5G mobile communications base stations and terminals.
Seica Dragonfly Next> series optical inspection systems
30 July, 2018 | Supplied by: Onboard SolutionsSeica has announced the Dragonfly Next> series, an AOI system providing optical inspection capabilities for through-hole technology (THT) components of electronic boards as well conformal coating (CC).
GW Instek GBM-3000 series desktop battery tester
09 July, 2018 | Supplied by: Fuseco Power Solutions Pty LtdGW Instek has launched the GBM-3000 series desktop battery tester, which uses AC 1 kHz as the test signal and measures a battery's voltage and internal resistance to 300 V (GBM-3300) and 80 V (GBM-3080).