Components > Modules

RF Micro Devices RF323x power platform

15 March, 2011 by

RF Micro Devices has expanded its product range to include a complete power platform for entry-level 3G handsets.


RF Micro Devices front-end module range

15 March, 2011 by

RF Micro Devices has added four products to its range of front-end modules for 3G/4G switch and signal conditioning applications.


Fastrax IT321 GPS receiver

18 January, 2011 by

The Fastrax IT321 is believed to be one of the smallest complete 20-channel GPS receivers available. The receiver is designed for devices that require a combination of small size, low power consumption and good navigation performance.


DataBridge wireless I/O modules

14 January, 2011 by

DataBridge wireless I/O modules offer a solution for point-to-point wireless data acquisition and control.


National Instruments FPGA adapter modules

06 December, 2010

National Instruments has introduced four adapter modules for its FlexRIO product family that provide FPGA-based reconfigurable I/O (RIO) for PXI systems, using the LabVIEW FPGA module software.


Linear Technology LTM9004/LTM9005 RF-to-digital µModule receivers

03 November, 2010 by

Linear Technology has introduced the LTM9004 and LTM9005, two RF-to-digital µModule receivers that integrate the key components for 3G and 4G base station receivers (WCDMA, TD-SCDMA, LTE, etc) and smart antenna WiMAX base stations.


Future Devices Technology Morph-IC-II FPGA platform

12 October, 2010 by

Future Devices Technology has launched a flexible development platform that speeds the creation of FPGA-based applications and simplifies the integration of hi-speed 480 Mbps USB communication in advanced logic circuit designs.


Future Technology Devices DB9-USB-RS232 module range

12 October, 2010 by

Future Technology Devices has available the DB9-USB-RS232 range of modules, designed to replace a DB9-based RS232 connector, on an existing board design, with a USB 2.0 connector interface.


RTD Embedded Technologies ECAN527HR module

08 October, 2010 by

RTD Embedded Technologies has introduced the ECAN527HR module that provides direct interface between PC/104 and CANbus.


National Instruments PXIe-4331 data acquisition module

23 September, 2010 by

The PXIe-4331 is the latest in the SC Express family of high-performance data acquisition modules with built-in signal conditioning.


Radiocrafts RC232 embedded wireless module range

22 September, 2010 by

A range of Radiocrafts RC232 embedded wireless modules and expansion boards for Australia and New Zealand is designed to integrate into the Sierra Wireless 3G Fastrack modem, creating a short-range wireless hub that can then connect over 3G to the outside world.


Linear Technology LTC5588-1 I/Q modulator

22 September, 2010 by

Linear Technology has introduced the LTC5588-1, the latest generation of an ultra-high linearity direct conversion I/Q modulator that operates over a wide frequency range from 200 MHz to 6 GHz. The device offers linearity performance of 30.9 dBm OIP3 (output third-order intercept) at 2.14 GHz - without calibration.


RF Micro Devices RF3858 front end module

16 September, 2010 by

RF Micro Devices has available the RF3858 front-end module that supports multiple tx/rx applications in the 900 MHz ISM band, including smart energy/advanced metering infrastructure.


National Semiconductor Simple Switcher power modules

16 September, 2010 by

National Semiconductor has introduced nine Simple Switcher power modules that feature an extended operating temperature range and vibration and drop testing for use in harsh environments.


Acces I/O Products PICO-II8IDO4A multifunction module

16 September, 2010 by

PICO-II8IDO4A from Acces I/O Products is designed for expansion on Pico-ITXe single board computers. This dense, multifunction product features eight individually optically isolated inputs, four fully protected solid-state FET outputs capable of switching up to 3 A each and two 16-bit analog inputs.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd