Cliff Electronics rugged locking connector range
17 July, 2011 byA range of rugged, locking connectors is designed for general industrial multipole power connection where a locking system is essential to prevent accidental disconnection and provide touch-proof mating. Three ranges are available enabling users to select the most appropriate connector for any application.
4Cabling cable management range
28 June, 2011 by4Cabling has released a family of cable management products to tidy and eliminate cable clutter.
Fluke DTX patch cord test adapter series
22 June, 2011 byFluke has released the DTX patch cord test adapter series, said to be the first adapters that can certify both shielded and unshielded category 5e, 6 and 6A cable assemblies to global ANSI/TIA 568-C and ISO 11801:2010 standards.
Omnetics Connector latching Micro-D connector
06 June, 2011 byOmnetics Connector has produced a latching system on its Micro-D connectors that replaces screws with finger-release side latches.
Samtec Edge Rate connector strips
04 June, 2011 bySamtec’s high-speed Edge Rate product range now includes 0.5 mm pitch connector strips and a right-angle socket. The system offers PCB space savings of up to 40% compared with the first-generation 0.8 mm pitch strips and also features rugged edge rate contacts.
Belden BNC connector range
02 June, 2011 byBrilliance high-definition BNC connectors designed for use with Brilliance Precision video coaxial cables, the new family of BNC connectors have been introduced.
Fluke TL175 TwistGuard test lead range
28 May, 2011 byFluke has available the TL175 TwistGuard test leads, claimed to be the only leads with a manually adjustable test tip guard for use in changing measurement situations.
Harwin M40 fine pitch connector series
26 May, 2011 byHarwin’s M40 series 1.00 mm fine pitch connectors are now available with 3D cad models and step files to make the design of new applications faster and easier for all board to board applications.
Omnetics Connector wire to PCB connectors
19 May, 2011 byOmnetics Connector has released a sleek, low-profile connector for taking wires from an I/O connector to a PCB.
Conxall Micro-Con-X waterproof 7-pin connectors
12 May, 2011 byConxall’s Micro-Con-X waterproof connectors are now available in 4-, 5-, 6- and 7-pin configurations.
Harwin Datamate shielded connectors
10 May, 2011 byHarwin says its 2 mm Datamate hi-rel connector family is now available with single-piece, machined metal backshells that provide electrical screening against RFI and EMI interference.
Clarke & Severn webshop range extended
10 May, 2011Clarke & Severn has expanded the range of products available online via its webshop www.cseonline.com.au
Omnetics Connector nano connectors
06 May, 2011 byOmnetics Connector is using its nano-connector Bi-lobes to help handle difficult signal routing and interconnect issues.
Harting MicroTCA Backplane connector
22 April, 2011 byThe MicroTCA backplane connector has passed the ruggedised environmental test according to the draft specification MTCA.3. The PICMG standards organisation has announced the completion of the MicroTCA Conduction Cooled testing.
Dominion G20 high-density connector
22 April, 2011 byCompactPCI serial PICMG CPCI-S.0 is a new, independent base standard that introduces a connector, which enables a much higher signal density and supports even higher transmission frequencies of 12 Gbps and more.