STMicroelectronics IPS4260L quad low-side intelligent power switch

Click2Contact

The STMicroelectronics IPS4260L quad low-side intelligent power switch is designed to boost efficiency in industrial automation, with four 260 mΩTYP RDS(ON) power switches and protection features in a space-efficient, thermally enhanced package. The IC can manage up to 2.4 A @ TAMB=85°C (0.6 A per channel or 2.4 A on single channel) with the possibility to set current limitation threshold by external resistor and to parallelise the channel.

The low rise and fall time (tr, tf <1 μs) allows high switching frequency (up to 250 kHz) and makes the product suitable for servo drives, motor controls, industrial-PC peripherals, programmable logic controllers and general low-side switching of loads connected to the positive supply. It also provides rich diagnostics for Smart Industry/Industry 4.0 smart-manufacturing applications.

The diagnostic features include open-load detection that operates while outputs are in the off state, which prevents hazards due to failures such as wire breaks. In addition, current limiting with non-dissipative cut-off shuts down the output stage after a user-selectable period in the event of overcurrent. An external resistor determines the limiting period, and restart is attempted automatically.

In order to ensure quick response even with inductive loads (such as motors), the power switch integrates a smart architecture for fast demagnetisation feature based on a single external clamp diode shared between the four channels. Further diagnostic features include two common open-drain pins for indicating open-load and overload/thermal-shutdown, and four input/output open-drain pins for per channel overload/thermal-shutdown signalisation.

An extensive ecosystem supports the IPS4260L as a member of ST’s family of intelligent power switches. It includes a dedicated graphical user interface for configuring the device, a detailed user manual and the STEVAL-IFP029V1 highly developed evaluation board. The board meets international safety standards for industrial equipment, with galvanic isolation between logic and power stages, reverse-polarity protection, and compliance with EMC regulations and IEC61000-4 specifications.

For more information: www.st.com/ips.