Harting DIN 41612 type 3C crimp female connector with housing

Monday, 17 September, 2012 | Supplied by: HARTING Pty Ltd


Crimp

Harting is now offering a cable connector for the DIN 41612 3C and 3R types. This is suitable for smaller printed circuit boards or subassemblies due to its space-saving design.

The product is easy to use. Three possible outlet ports are available, which can be opened up by simply breaking through the external walls as required. The locking levers are pre-injection moulded and subsequent assembly is not necessary. This reduces the number of individual components.

The crimp contacts are available on rolls of 500 or 5000 for series production and as individual contacts for repair purposes. The crimping tool required comes as a hand crimping tool, a semiautomatic device or a fully automatic device, depending on the unit volume and level of automation. Strain relief is ensured by a cable tie which protects the cable and attaches it directly to the housing. Straight and right-angled male connectors, which snap into the shell housing, are available as mating plugs.

The connector offers the same robustness as other products in the range in the full and half sizes.

Online: www.harting.com.au
Phone: 03 9466 7088
Related Products

SCHURTER 4783 IEC appliance inlet

The IEC appliance inlet 4783 from SCHURTER combines a reconnectable C13 appliance inlet with a...

Hi-Q Components plastic cable ties and cable management components

Cable ties, cable tie mounts and cable management components form part of the large range of...

Harwin Archer Kontrol board-to-board connectors

Harwin has confirmed that its Archer Kontrol 1.27 mm pitch board-to-board connectors support data...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd