Mornsun R3 series fixed input DC converters

Wednesday, 11 July, 2018 | Supplied by: DLPC Pty Ltd


B s 1wr3 jpg

Mornsun’s R3 series fixed input DC converters offer solutions to three common issues with power supply design: short-circuit protection where large capacitive loads make it difficult to coexist; focus on high efficiency at full load while ignoring efficiency at low-load, standby current power consumption; and situations where a large capacitor cannot be used as it may cause start-up failure or destroy the converter.

Mornsun’s R3 series fixed input voltage DC/DC converters have adopted IC technologies that decouple these conflicts while maintaining continuous short-circuit protection, capacitive load and start-up capability, which greatly resolves problems existing in the design.

The 1 W DC/DC converters free up users’ time from power supply design with a simple and effective solution with a small footprint. They are available in a comprehensive range of cross-industry SIP, DIP and SMD pin-compatible packages.

The converters feature high efficiencies at low- and high-load low-standby power consumption, high capacitive loading up to 2400 µF and short-circuit protection with soft start-up. UL62368/EN62368 certifications are in place.

Online: www.dlpc.com.au
Phone: 07 3823 4844
Related Products

Magellan Power Solar Gate solar power monitoring system

Magellan Power's Solar Gate combines hardware and software to control and prevent the export...

Magellan Power Stand Alone Power System

Magellan single- and three-phase Stand Alone Power Systems are designed to operate independently...

Vicor DCM DC-DC converter modules

The DCM ChiP (converter housed in package) is a DC-DC converter module that operates from an...


  • All content Copyright © 2018 Westwick-Farrow Pty Ltd