NFA series DC-DC converters

Thursday, 09 June, 2005 | Supplied by: Adilam Technologies


C&D Technologies has added three non-isolated NFA series DC-DC converters to its Volant family of point-of-load devices.

The converters have a minimal size and footprint making them suitable for high-density applications. Offered in 10, 16 and 20 A models, they have efficiencies of up to 95%.

The 20 A model has a pin-out and package, while the 10 and 16 A models are Distributed-power Open Standards Alliance compatible. With an extended input voltage range of 6 to 14, the series supports 4:1, 5:1 and 6:1 intermediate bus converters, intermediate bus architecture applications and is output voltage programmable by an external resistor.

Available in positive and negative enable logic models, the series has monotonic start-up with pre-bias and an optional power good signal. For system level power-up, the series has a sequence feature for voltage turn-on/off tracking.

This enables designers to control voltage rails to start up in a sequential manner without the need for external circuitry.

Online: www.adilamtech.com.au
Phone: 03 9737 4900
Related Products

Cincon LFM300S AC-DC semi-potted power supply

The Cincon LFM300S AC-DC semi-potted power supply is suitable for a range of applications and...

STMicroelectronics TSC1641 digital power monitor

The TSC1641 digital power monitor from STMicroelectronics helps enhance energy use in industrial...

Schneider Electric APC Smart-UPS Ultra

The Schneider Electric APC Smart-UPS Ultra range is designed for edge environments and micro data...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd