Ipetronik M-UNI2 module for temperature and voltage measurement
The M-UNI2, from Ipetronik, offers temperature and voltage measurement with a single device. The flexible module is suitable for mobile testing as well as test bench applications.
The unit provides eight analog inputs that can be configured individually via IPEmotion either for thermal elements Type K (NiCr/NiAl) or voltage (±30 V). The analog signals of the measurement inputs are converted by the 16-bit ADC and are then output to CAN bus according to ISO 11898-2 standard.
Other features include cold junction compensation, a linearisation look-up table and complete galvanic isolation (inputs, CAN, power supply, enclosure). Typical measurement applications include aggregate and component testing, voltage monitoring/analysis of vehicle networks, thermal management applications, engine compartment applications and HVAC analysis.
Phone: 07 3868 4255
Teledyne FLIR TG268 thermal imaging spot temperature camera
The thermal imaging spot temperature camera is designed to reduce diagnostic time and simplify...
Teledyne FLIR CM78-PV solar panel clamp meter
The solar panel clamp meter is suitable for commercial and industrial electrical inspections.
Teledyne FLIR Si1-LD acoustic imaging camera
The acoustic imaging camera utilises ultrasonic technology to pinpoint leaks with enhanced...
Learn More
I am interested in Ipetronik M-UNI2 module for temperature and voltage measurement.
Complete the form and a supplier representative will be in touch.
