Dytran’s portable vibration meter D4190 is for field testing accelerometers and can be used in conjunction with a handheld shaker for sensor validation.
It converts the vibration signal from a 10 mV/g or 100 mV/g IEPE accelerometer to the peak value of the vibration signals generated by the sensors.
The instrument has a built-in power supply that provides 2 mA at +18 VDC, able to power either the 10 mV/g or 100 mV/g IEPE accelerometer and two rotary switches which allow the user to select either of the accelerometer inputs or to select a full scale range of 2, 20 and 50 g.
There is a large digital front panel display, a bias test switch to verify proper accelerometer operation and an output jack for monitoring the signal with an oscilloscope or analyser. Weighing 320 g, measuring 135 x 84 x 57 mm and with two replaceable 9 V batteries providing up to 10 hours of continuous operation the meter is suitable for field or bench vibration measurements.
Phone: 02 9975 3272
Teledyne FLIR TG268 thermal imaging spot temperature camera
The thermal imaging spot temperature camera is designed to reduce diagnostic time and simplify...
Teledyne FLIR CM78-PV solar panel clamp meter
The solar panel clamp meter is suitable for commercial and industrial electrical inspections.
Teledyne FLIR Si1-LD acoustic imaging camera
The acoustic imaging camera utilises ultrasonic technology to pinpoint leaks with enhanced...
