EM Test UCS 500N7 test simulator

Friday, 09 March, 2012 | Supplied by: Consultant Technology Australia Pty Ltd


The EM Test UCS 500N7 includes circuits necessary to conduct fully compliant tests at levels that go beyond common test requirements.

The device offers EFT/burst to IEC/EN 61000-4-4, surge to IEC/EN 61000-4-5, power fail and optionally ANSI/IEEE C62.41, telecom surge (IEC/EN 61000-4-5) and magnetic field.

Surge can be tested up to 7.0 kV either according to IEC 61000-4-5 or ANSI/IEEE C62.41. The UCS 500N7 offers an optional integrated ringwave module as per ANSI/IEEE C62.41 and IEC 61000-4-12 for ringwave tests on mains supply lines.

The simulator can be operated manually from the front panel or by remote using the EM TEST IEC control software supported by Windows 2000, XP, Vista and 7.

Remote control is achieved either via USB or GPIB. IEC control supports a wide range of GPIB cards of National Instruments.

Fail inputs allow control of ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for signal measurement and verification. Safety features such as interlock and warning lamp control are available.

Online: www.contec.com.au
Phone: 02 9452 3831
Related Products

Teledyne FLIR CM78-PV solar panel clamp meter

The solar panel clamp meter is suitable for commercial and industrial electrical inspections.

Teledyne FLIR Si1-LD acoustic imaging camera

The acoustic imaging camera utilises ultrasonic technology to pinpoint leaks with enhanced...

Keysight Technologies FieldFox handheld signal analysers

The A- and B-Series FieldFox handheld analysers from Keysight Technologies can be paired with VDI...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd