Markforged Mark Two and Mark X 3D printers
03 July, 2017 | Emona Instruments Pty LtdThe Markforged range of 3D printers will print high-strength carbon fibre parts with the strength of metal for end-use products, prototypes, enclosures, brackets and mounts.
RECOM RAC01-G and RAC02-G series AC/DC converters
01 July, 2017 | RECOM Power GmbHThe RAC01-G (1 W) and RAC02-G (2 W) series converters were specially designed to continuously and efficiently power smart building infrastructures. They accept a broad nominal input voltage range from 100 to 240 VAC for worldwide use.
Mornsun TD3(5)01MCANFD series CAN transceiver modules
30 June, 2017 | DLPC Pty LtdThe Mornsun TD3(5)01MCANFD series CAN transceiver modules promote data transmission rate to 5 Mbps with isolation of 2500 VDC.
Fluke Calibration 5730A multifunction calibrator
30 June, 2017 | Emona Instruments Pty LtdFluke Calibration's 5730A multifunction electrical calibrator can be used to calibrate a wide range of digital multimeters, up to long-scale 8.5-digit DMMs, as well as RF voltmeters when equipped with the wideband option.
Tektronix 5 Series MSO mixed signal oscilloscope
30 June, 2017 | Vicom Australia Pty LtdThe 5 Series MSO mixed signal oscilloscope features a host of innovations, including FlexChannel technology that allows four, six or eight analog channels and up to 64 digital channels, integrated protocol analysis and signal generator, a 12-bit signal acquisition system, a high-definition capacitive touch display and an intuitive Direct Access user interface, delivering flexibility and visibility into complex embedded systems.
Mornsun LS series low-power AC/DC converter
29 June, 2017 | DLPC Pty LtdMornsun offers a range of single inline low-power AC/DC converters that are suitable for IoT, smart devices and building automation applications.
Tektronix AWG5200 Arbitrary Waveform Generator (AWG)
29 June, 2017 | Vicom Australia Pty LtdTektronix's AWG5200 Arbitrary Waveform Generator (AWG) offers high signal fidelity and scalability to meet demanding signal generation needs in advanced research, electronic test, and radar and electronic warfare (EW) system design and test.
NI DAQExpress DAQ companion software
29 June, 2017 | National Instruments Pty LtdDAQExpress is NI's DAQ companion software. Its features will help reduce the time users spend setting up their system and analysing collected data.
STMicroelectronics BlueNRG-2 Bluetooth Low Energy (BLE) system-on-chip
29 June, 2017 | STMicroelectronics Pty LtdThe BlueNRG-2 system-on-chip includes a power-efficient programmable processor and low-power features including an ultrafrugal standby mode.
STMicroelectronics STUSB4710 and STUSB1602 USB Type-C controllers
28 June, 2017 | STMicroelectronics Pty LtdSTMicroelectronics has introduced two USB Type-C certified port-controller ICs with built-in protection, which help designers implement interfaces to support their required blend of USB features. These can include power negotiation, managed active cables and support for guest protocols.
NI PXIe-5840 vector signal transceiver
28 June, 2017 | National Instruments Pty LtdNI's second-generation PXIe-5840 vector signal transceiver features the flexibility of software-defined radio architecture and RF instrument class performance.
Peel Electronics LPG electronics manufacturing
28 June, 2017 | Peel ElectronicsPeel Electronics (trading name Gas Sensors Australia) is an Australian designer of specialised electronics for the LPG automotive industry. Utilising a high-quality surface-mount machine to manufacture its products, the company designs and engineers its products locally.
Tektronix TTR500 Series vector network analyser (VNA)
28 June, 2017 | Vicom Australia Pty LtdTektronix's TTR500 Series vector network analyser (VNA) features a 122 dB dynamic range and 6 GHz frequency range. It also includes VectorVu-PC analysis software and what is claimed to be the only built-in bias tee for testing active devices in this category.
ROLEC enclosures for Industry 4.0
27 June, 2017 | ROLEC OKW Australia New Zealand P/LROLEC has incorporated the requirements of the Internet of Things (IoT) and Industry 4.0 into its current range of enclosures.
Robo C2 and R2 3D printers
27 June, 2017 | Outerspace Design GroupRobo 3D's 3D printers were developed in conjunction with Outerspace Design as printers that are fun and easy to use.
