Products

Vicor VIA PFM AC-DC front-end module

28 May, 2015 | Vicor Corporation

Vicor Corporation has introduced its high-density, low-profile, integrated VIA PFM AC-DC front-end power modules. The converter modules achieve a power density of 8 W/cm3 supplying an isolated, PFC-regulated 24 or 48 V SELV DC output at up to 400 W from the universal AC input range of 85 to 264 V with 93% peak efficiency.

ADLINK PCIe-9814 PCI Express digitiser

28 May, 2015 | ADLINK Technology Inc

ADLINK Technology has announced its high-speed PCI Express digitiser, the PCIe-9814, featuring four simultaneously sampled 80 MS/s input channels with 12-bit resolution, 40 MHz bandwidth and up to 1 GB DDR3 onboard memory.

Acromag XMC-7K XMC modules

27 May, 2015 | Metromatics Pty Ltd

Acromag's XMC-7K family of XMC mezzanine modules are enhanced with the Xilinx Kintex -7 FPGA for low power consumption and good processing performance. The reconfigurable FPGA is made possible via a direct download into the Flash configuration memory over the PCIe bus or the JTAG port.

CAP-XX Thinline supercapacitors

27 May, 2015 | Cap-XX Pty Ltd

CAP-XX has launched its Thinline series of single-cell supercapacitors. At 0.6 mm thick, the series was developed to address the size, weight and cost challenges of designing thin, sometimes disposable electronic devices for the Internet of Things (IoT).

Analog Devices ADALM1000 active learning module

26 May, 2015 | element14

Analog Devices has launched the ADALM1000, a learning ecosystem for mixed-signal circuit designs. The product is suitable for teachers, students, electronic design engineers, hobbyists and makers that can benefit from a portable source measure unit that works by streaming to a desktop computer or laptop.

Vishay Draloric RCV e3 thick-film chip resistors

26 May, 2015 | RS

Vishay Intertechnology has released a series of thick-film chip resistors designed to meet the demand for high voltages in industrial and medical applications while saving valuable PCB space.

OKW COMTEC ergonomic keypad enclosures

26 May, 2015 | ROLEC OKW Australia New Zealand P/L

OKW's COMTEC range of sloping front keypad enclosures is available in seven standard sizes. The modern housings feature a 'softline' design with an ergonomically inclined (10°) operating area, which ensures comfortable operation of the controls.

Harwin EZ-BroadWare test point range

25 May, 2015 | Clarke & Severn Electronic Solutions

Harwin's EZ-BroadWare SMT test points are low in profile with a small PCB footprint. This makes them suited to applications where space is at a premium, such as the medical, aerospace, industrial, instrumentation and control systems industries.

ROLEC aluCASE custom-ready die-cast aluminium enclosures

21 May, 2015 | ROLEC OKW Australia New Zealand P/L

ROLEC's aluCASE die-cast aluminium enclosures have been designed to simplify customisation requirements. The enclosures are rated to IP67 but can also be specified to IP69K with a special factory-fitted gasket.

ODU MEDI-SNAP connector for medical applications

20 May, 2015 | Clarke & Severn Electronic Solutions

The ODU MEDI-SNAP is a push-pull circular connector with a plastic housing for medical applications. The push-pull system is said to ensure reliable contact, colour coding makes the connector visually recognisable and the plastic housing material means the product remains economically efficient.

TriQuint/Qorvo TGF3015-SM input-matched transistor

20 May, 2015 | Wireless Components

The 10 W (P3 dB), 50 Ω input-matched TGF3015-SM is a discrete GaN on SiC HEMT that operates from 0.03 to 3 GHz. The integrated input-matching network enables wideband gain and power performance, while the output can be matched on board to optimise power and efficiency for any region within the band.

Artila Electronics RIO-2018 web-enabled thermocouple input module

20 May, 2015 | Micromax Pty Ltd

The Artila Electronics RIO-2018 is a web-enabled thermocouple input module. Powered by an ARM Cortex M3 processor and FreeRTOS operating system, the product features three thermocouple input channels, one 10/100 Mbps ethernet port, two isolated digital input channels and one relay output.

TDK TCM0403R miniaturised thin-film common-mode filter

19 May, 2015 | TDK Australia

TDK Corporation has expanded its line-up of common-mode filters. The TCM0403R thin-film common-mode filter offers a common-mode attenuation of 27.5 dB at 850 MHz in a 0403 package (0.45 x 0.30 mm).

Toshiba TB9051FTG small-sized driver IC for DC brushed motor

19 May, 2015 | Toshiba (Australia) Pty Ltd

Toshiba has launched the TB9051FTG, a small-sized motor driver IC for DC brushed motors intended for automotive electronic throttle control.

ODU-MAC MEDI-FLEX connector

14 May, 2015 | Clarke & Severn Electronic Solutions

The ODU-MAC MEDI-FLEX series is now available in a medical white plastic housing. The product is suitable for the high demands of medical technology.

  • All content Copyright © 2026 Westwick-Farrow Pty Ltd