Würth Elektronik MagI³C-FDSM fixed step-down regulator modules
06 May, 2022Würth Elektronik's MagI³C-FDSM fixed step-down regulator modules now cover all bus voltages from 12 up to 48 V.
Smart grid technology helps to manage network voltage
29 April, 2022With the rapid uptake of solar PV, the low-voltage residential electricity network is being required to perform in ways it was never originally designed to perform.
Diotec DI62061/2/3 low-dropout (LDO) voltage regulators
22 April, 2022Diotec's DI62061/2/3 series of high-precision low-dropout (LDO) voltage regulators are capable of supporting an extended operating temperature range of -40 to + 85°C.
Analog Devices ADP1032 Micropower Management Units
01 December, 2020Analog Devices ADP1032 Micropower Management Units (PMUs) are high-performance, isolated devices that combine an isolated flyback and a DC-to-DC regulator providing two isolated power rails.
Wireless charging enabled for robot fleets
12 June, 2020WiBotic provides wireless charging and power optimisation solutions that are integral to charging the rapidly growing ecosystem of aerial, mobile, marine and industrial robots.
Collaboration to grow a coral reef
25 May, 2020CCell Renewables is on a mission to combat coastal erosion and enhance marine ecosystems by restoring and growing new coral reefs on a large scale.
STMicroelectronics RHRPMICL1A programmable integrated current limiter
30 April, 2020STMicroelectronics has created an innovative radiation-hardened (rad-hard), programmable integrated current limiter (ICL) that prevents power surges and overloads from damaging electronic equipment operated in space.
Maxim MAXM17532 and MAXM15462 Himalaya uSLIC DC-DC power modules
23 March, 2018The MAXM17532 and MAXM15462 ultrasmall (2.6 x 3 x 1.5 mm) integrated DC-DC power modules are part of Maxim's extensive portfolio of Himalaya power solutions for industrial, healthcare, communications and consumer markets.
STMicroelectronics SCLT3-8BQ7 and CLT01-38SQ7 digital-input current limiters
27 April, 2016STMicroelectronics has introduced two high-speed digital-input current limiters for circuit protection in factory automation. The SCLT3-8BQ7 and CLT01-38SQ7 provide industrial programmable logic controllers (PLCs) with fast, robust protection against unwanted input-signal current spikes while reducing power consumption, board space and component costs.
Maxim Integrated 48 V single-stage to PoL conversion
15 March, 2016The 48 V point-of-load (PoL) single-stage DC/DC regulator from Maxim Integrated breaks down efficiency, density and transient performance barriers by using integrated power and magnetics. The 48 V single conversion to the PoL eliminates one conversion loss and reduces distribution power loss by a factor of 16 in a rack implementation, compared with 12 V architectures.
STMicroelectronics LD39020 Very Low Quiescent Current Linear Regulators
23 December, 2014STMicroelectronics LD39020 Very Low Quiescent Current Linear Regulators are high-accuracy voltage regulators that provide 200 mA of maximum current from an input voltage ranging from 1.5 to 5.5 V, with a typical dropout voltage of 200 mV.
RECOM R-78W series switching regulator
31 August, 2014RECOM has introduced its wired switching regulator, the R-78W series. The wired version of the R-78 is intended for use in applications which use few or no printed circuit boards.
Monolithic Power Systems MPM3805 and MPM3810 step-down switch-mode converter modules
08 August, 2014The MPM3805 and MPM3810 are monolithic step-down switch-mode converter modules with built-in internal power MOSFETs and inductors. The DC/DC modules have a small surface mount and are available in a 2.5 x 3 x 0.9 mm QFN package.
ROHM BD4xxMx series low-dropout regulators
06 June, 2014ROHM has announced a 16-model line-up of LDOs optimised for MCU power supplies in automotive body and powertrain systems. The BD4xxMx series is said to achieve less than half the no-load current consumption of standard products.
Diodes ZXRE330 voltage reference
29 May, 2014The ZXRE330 3.3 V shunt voltage reference from Diodes has been introduced to help achieve improvements in both stability and power consumption. Pin-compatible with industry-standard parts, the product is offered in surface-mount SOT23 and through-hole TO92 package options.
