Power

Miniaturised device helps steady electrical currents

27 September, 2013

Researchers at the California Institute of Technology (Caltech) have developed a device that can help steady the electrical currents needed to power high-end electronics and stabilise the signals of high-quality lasers.


Power module solutions for the automotive electronics industry

27 September, 2013 | Supplied by: DLPC Pty Ltd

Automotive electronic technologies are popularly applied for use in many and varied applications in electric, hybrid-electric and conventional vehicles. Isolated DC-DC converters are mainly used in automotive electronic systems for stable sampling and control signal isolation. This article indicates where DC-DC converters are commonly used in automotive applications.


Stanford scientists develop microbial battery

25 September, 2013 by Tom Abate*

Stanford researchers have developed a microbial battery that generates electricity from sewage using naturally occluding ‘wired microbes’ as mini power plants, producing electricity as they digest plant and animal waste.


Australia-European collaboration advancing electromaterials science

17 September, 2013

Australia-based researchers are in Ireland this week to team up with European collaborators who have helped drive the exciting developments in graphene, medical bionics, artificial muscles and next-generation solar cells at the Australian Research Council Centre of Excellence for Electromaterials Science (ACES).


Panasonic's solar cells to support Tokai Uni solar car team

30 August, 2013

Panasonic will provide technological support to the Tokai University Solar Car Team as it competes in the World Solar Challenge (WSR), held in Australia from 6 to 13 October 2013. The company will be supplying high-efficiency HIT solar cells with high electricity output and high-capacity lithium-ion batteries.


RECOM RAC series 1-10 W AC/DC power supplies with ultrawide input voltage range

29 August, 2013 | Supplied by: RECOM Asia Pte Ltd

RECOM Electronic has provided a claimed innovation in low-power AC/DC converters; all the models from 1-10 W in the RAC series accept AC input voltages down to 80 VAC. Thus, the wide-range 80-265 VAC input or ultrawide-range 80-305 VAC input converters are compatible with all mains voltages worldwide.


3D graphene for solar power

23 August, 2013 by Marcia Goodrich

Michigan Technological University scientists have developed 3D graphene, an inexpensive material that could replace the platinum in solar cells without degrading their efficiency.


Rechargeable flow battery for solar and wind power

23 August, 2013

MIT researchers have developed a palm-sized rechargeable flow battery prototype that generates three times as much power per square centimetre as other membraneless systems.


Battery-free wireless devices

14 August, 2013

University of Washington engineers have created a new wireless communication system that allows devices to interact with each other without relying on batteries or wires for power. The devices exchange information by reflecting or absorbing pre-existing radio signals. The new communication technique, which the researchers call “ambient backscatter”, takes advantage of the TV and cellular transmissions that already surround us around the clock.


High-temperature capacitor for electric vehicles

12 August, 2013

Scientists have developed a new capacitor that can operate close to normal efficiency at over 200°C, significantly higher than any other capacitor on the market. It also offers a high energy density - the measure of how much energy it can store.


Graphene-based supercapacitors for portable electronics

05 August, 2013

Monash University researchers have developed a completely new strategy to engineer graphene-based supercapacitors (SC), making them viable for widespread use in renewable energy storage, portable electronics and electric vehicles.


FTU power solutions in the electric power industry

04 August, 2013 | Supplied by: DLPC Pty Ltd

In the electric power industry, equipment such as RTUs (remote terminal units), DTUs (data transfer units), FTUs (feeder terminal units) and TTUs (distribution transformer supervisory terminal units) are switch monitoring devices installed in the substation close to the feed breakers.


BMW i3 and power electronics

31 July, 2013

The BMW Group has debuted the series version of its electric vehicle BMW i3, simultaneously in New York, London and Beijing. The BMW i3, the group’s first pure electric series produced model, features a number of technological innovations, such as a carbon-fibre passenger cell and a chassis made of aluminium.


Hybrid cloud to save battery life

26 July, 2013

Romanian computer scientists have developed a new system that is said to boost phone battery life by booting power-consuming computational tasks to an on-the-fly ad hoc cloud in which smartphones are both clients and computing resources.


Nitrogen-doped graphene nanoplatelets for energy conservation

24 July, 2013

Researchers have announced a simple, low-cost and eco-friendly method of creating nitrogen-doped graphene nanoplatelets (NGnPs), which could be used in dye-sensitised solar cells and fuel cells. 


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd