Test & measure > Meter monitoring

Keysight Technologies E4982A LCR meter

20 August, 2015

Keysight Technologies has introduced three low-frequency options for its E4982A LCR meter. The options make the meter suitable for RF inductor, coil and EMI filter manufacturers that are required to perform impedance testing at various frequencies.


FW Bell 5180 Gauss/Tesla Meter

29 June, 2015

The FW Bell 5180 Gauss/Tesla Meter is a magnetic measuring device with digital signal processing (DSP) that works in either sensitive laboratory environments or rugged industrial settings.


London Electronics Model N21 graphical-screen digital panel meter

31 March, 2015

London Electronics has released a compact and easy-to-use panel meter that can be configured with a USB connection. Being graphical, it allows users to create digital and bar graph representations of their measurements.


ICP DAS Power Monitor & Management Solution (PMMS)

15 October, 2014

The ICP DAS Power Monitor & Management Solution (PMMS) consists of the Smart Power Meter and the Power Meter Concentrator. Supported by a web server and database, the process of developing a power monitoring system is simplified.


Wachendorff UA964801 indicator/panel meter

08 April, 2014

The Wachendorff UA964801 indicator/panel meter is used for the acquisition and retransmission of many types of processes. The product features relay outputs for alarm outputs, analog outputs for process indication/set points and programmable digital inputs.


Network Technologies ENVIROMUX-5D environmental monitoring system

26 February, 2014

The ENVIROMUX-5D uses sensors to monitor critical environmental and security conditions. When an environmental sensor goes out of range of a configurable threshold or a security sensor is triggered, system administrators will be notified.


Network Technologies ENVIROMUX-5D-IND environmental monitoring system

23 September, 2013

Network Technologies has added the ENVIROMUX-5D-IND high-temperature industrial environmental monitor to its medium-sized advanced server environment monitoring system range. The ENVIROMUX-5D-IND extends the temperature sensor range to cover 0 to 80°C.


Narda NBM-550 Broadband Field Meter

30 July, 2013

The Narda NBM-550 makes accurate measurements of non-ionising radiation from various transmission facilities, such as towers for general public and occupational exposure.


Comtest NATA-accredited calibration services

24 April, 2013

Comtest has been accredited by NATA for calibration services. Comtest has, for some time, been providing internal calibration services but has now had its accreditations increased to provide calibrations as a public testing service.


Comtest Laboratories electrical safety testing accreditation for AS/NZS 3197

24 April, 2013

Comtest Laboratories has announced an additional accreditation for its services in the fields of electrical safety and energy efficiency. The company can now provide electrical safety testing in accordance with AS/NZS 3197: Portable electrical control or conditioning devices.


Yokogawa WT300 series digital power meters

13 March, 2013

The WT300 series digital power meters are the fifth generation of Yokogawa’s compact digital power meters.


Hioki Model 3544 resistance meter

26 February, 2013

The Hioki Model 3544 resistance meter is a four-terminal instrument providing a basic resolution of 1 µΩ and has a large measurement range from 30 mΩ to 3.5 MΩ at a maximum measurable current of 300 mA.


Yokogawa WT300 series digital power meters

06 February, 2013

The WT300 series digital power meters are the fifth generation of Yokogawa’s compact digital power meters.


EM TEST CWS 500N4 conducted common mode testing for electricity meters

05 December, 2012

The EM TEST CWS 500N4 comes in a compact single-box design and is designed to test for EMC immunity to conducted, common mode disturbances in the frequency range 0 Hz (DC) to 165 kHz. Such test requirements are specified in IEC 61000-4-16 and cover continuous mode testing as well as short-term testing with DC, 16 2/3 Hz, 50 Hz and 60 Hz with four test levels each and a sweep mode from 10 Hz to 165 kHz.


Fluke CNX Wireless System

01 December, 2012

The Fluke CNX Wireless System is a set of test tools that wirelessly connect multiple measurement modules and send simultaneous readings to a master device up to 20 m away. The rugged, customisable tool set lets users choose various measurement modules based on their specific troubleshooting scenario. It simplifies troubleshooting by enabling up to 10 simultaneous electrical and temperature wireless measurements.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd