ROLEC mobilCASE handheld enclosures

ROLEC has extended the mobilCASE range of handheld enclosures with more case combinations and accessories. The robust and attractive enclosures can be used for either cable-connected or battery-powered equipment such as data collection units, machine controllers, robot programmers and test and measurement devices.

The configurations include portable models with shoulder straps and bump protection. There are also desktop models with a tilt stand that can be set at different angles and display models with swivel brackets that can be fitted to a desktop, wall or control panel. A holder accessory allows the enclosures to be stationed on a pole or bracket when not in use.

The enclosures consist of a single- or two-piece anodised aluminium case body, with internal guides rails. Two black die-cast aluminium end panels are fitted to the extrusions by self-tapping screws. The cases can be sealed up to IP65 protection class.

The design incorporates a round edge section, which is easy to hold and acts as a battery compartment. An M16 cable gland can be fitted in place of the battery compartment, allowing for cable connection to the host machine.

The range consists of 12 sizes with external dimensions from 118 x 120 x 80 mm to 168 x 240 x 130 mm. The recessed top section can be used for mounting push-button switches, membrane keypads, joy-stick or tracker ball controls, etc.

ROLEC can supply the enclosures fully customised with additional holes for push-buttons, displays, connectors and cable glands. The cases can be silk-screen printed with customer legends and logos.