CAN controllers

Friday, 17 April, 2009 | Supplied by: ERNTEC Pty Ltd



The compact Faulhaber motion controllers can be optionally operated via an RS232 or CAN interface.

The configuration of the electronics is based on a digital signal processor, which enables high performance as well as precise positioning and low speeds. The high degree of efficiency permits a continuous output current of up to 6 A.

Optimally coordinated with the control of brush and brushless DC motors, they feature accurate speed/torque regulation as well as precise positioning with a resolution of up to 1/3000 revolutions.

The inputs and outputs can be used for different purposes depending on the application and can be configured via the interface. As a printed circuit board version the controller can also be integrated into superordinate systems.

With a CAN interface and CANopen protocol, up to 127 drives can be network controlled.

A user interface and the next-generation ‘Motion Manager 3’ software are available.

Online: www.erntec.net
Phone: 03 9756 4000
Related Products

Aitech A174 I/O expansion subsystem

Aitech's compact A174 is an I/O expansion subsystem that enables embedded designers to easily...

Winmate M700DQ8 rugged tablet

The Winmate M700DQ8 is a 7″ rugged ARM-based Android tablet built to MIL-STD-810G with a...

Winmate B Series stainless steel panel PC

The B Series panel PC features a 316 stainless steel housing, while push-buttons bring control...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd