Advantech has introduced the ADAM-5081, a high-speed quadrature encoder and counter module for use with the ADAM-5550 series programmable automation controllers (PACs).
The 5081 has a high isolation of 2500 VDC, a high-speed frequency mode (5 Hz <0x007E> 1 MHz) and a counter code at 1 MHz.
There’s also a digital filter to eliminate noise and interference (1 <0x007E> 65,000 µs), which ensures accurate data collection and transmission.
The encoder features four counter modes (up/down, bidirectional, up and A/B phase modes), which counts precise data units in minute detail.
The frequency mode supports up to eight channels and can control a wider range of electromagnetic wave status under certain conditions.
It supports four digital output channels, which can be triggered by a preset counter value, and can watch the position encoder of the machine while doing the position comparing. Once the preset value is reached, the system requires a digital output signal to trigger the camera.
With built-in DO channels, the respond speed is maximised.
Phone: 1300 308 531
Acromag XMC640 network interface module series
The Acromag XMC640 series of network interface modules features multiple fibre-optic interfaces...
Acromag XVME-6800 single board computer
The new XVME-6800 single board computer combines Intel Xeon W processing, high-speed connectivity...
Acromag QMC470 TTL Digital I/O Module
The QMC470 TTL Digital I/O Module provides high-density digital interfacing for embedded...
