Taconic’s TLX range comes from over 35 years of experience in laminate manufacture and providing tight tolerance and highly controlled electrical and mechanical properties.
The Dk (dielectric constant) available has a range of 2.45 to 2.65 with a tolerance of ±0.04. The dissipation factor is about 0.0019 when measured at 10 GHz. TLX laminates can be sheared, drilled, milled and plated using standard manufacturing methods for PTFE/woven fibreglass materials. The laminates are dimensionally stable and exhibit virtually no moisture absorption during fabrication.
TLX laminates are clad in ½,1 or 2 ounces of electrodeposited copper on one side or both sides of the panel and standard sheet sizes are 24 x 18” or 48 x 36”.
Typical applications include radar systems, phased array antennas, microwave transmission devices and mobile communication systems.
NXP Semiconductors MCX series industrial and IoT microcontrollers
The MCX series of industrial and IoT microcontrollers features an innovative power architecture...
ADLINK COM-HPC-mMTL embedded module
The COM-HPC-mMTL embedded module features up to 16x PCIe lanes, 2 SATA interfaces and USB 3.0/2.0...
Axiomtek ROBOX300 robotics controller
The ROBOX300 robotics controller from Axiomtek is designed for autonomous mobile robots and...
Learn More
I am interested in RF and microwave laminate.
Complete the form and a supplier representative will be in touch.
