IEI IGPS-7084GP ethernet switch

Monday, 15 November, 2010 | Supplied by: ICP Electronics Australia

IEI IGPS-7084GP ethernet switch

IEI has released the IGPS-7084GP fully managed gigabit redundant ring PoE ethernet switch with 8 x 10/100/1000Base-T(X) ports, PoE (PSE) function and 4 x 1000Base-X SFP ports.

With support of ethernet redundancy protocol, the O-Ring (recovery time <20 ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect applications from network interruptions or temporary malfunctions via its fast recovery.

Part of ORing’s thunder switch series, the device provides IP-based bandwidth management which can limit the maximum bandwidth for each IP device. The user can configure the IP camera and NVR to allow more bandwidth, while placing a limit on the bandwidth of other devices.

The series also supports application-based QoS which can be used to prioritise data streaming according to TCP/UDP port number.

The switch also offers DOS/DDOS auto prevention. If there is a surge detected in a particular IP flow, the switch will block the source IP address for a specified time to prevent a privacy or security breach.

The device also supports power over ethernet transmitting up to 30 W and data to remote devices over standard twisted-pair cable within an ethernet network.

Online: www.icp-australia.com.au
Phone: 02 9457 6011
Related Products

Step Global Time Tools TA110 GPS NTP time server

The Time Tools TA110 GPS NTP time server is designed for accurate time synchronisation of...

Excelitas pco.horizon 9.1 bi TDI CLHS line scan camera

The pco.horizon 9.1 bi TDI CLHS line scan camera features 9K resolution and 256 TDI stages for...

Exascend PE4 Series NVMe solid-state drive

The PE4 Series of solid-state drives from Exascend are designed to meet the storage requirements...


  • All content Copyright © 2025 Westwick-Farrow Pty Ltd