Dewesoft KRYPTONi-1xHV and KRYPTONi-1xTH-HV DAQ modules
KRYPTON ONE DAQ instruments are rugged, small and fully distributable 1-channel data acquisition modules. The modular devices have been especially made for field measurements in any environment, with a small size that allows them to fit in tight places and be placed close to the sensors.
The latest additions to the KRYPTON ONE family are two modules made for high-voltage and thermocouple temperature measurements with high isolation: KRYPTONi-1xHV and KRYPTONi-1xTH-HV. Both DAQ modules provide safety at high voltages with an overvoltage category of Cat II 1000 V.
The KRYPTONi-1xHV module is designed for high-voltage measurements with a single input range of ±1000 V. The acquisition is based on 24-bit SAR ADC with a sampling rate of up to 40 kSps and an additional anti-aliasing filter. The input connector is a 4 mm safety banana jack.
The KRYPTONi-1xTH-HV is an isolated single thermocouple module designed for temperature measurements at high voltages. It supports K-type thermocouples. Temperature is acquired by using a 24-bit delta-sigma ADC with the sampling rate up to 100 S/s. Cold junction compensation is provided by a Pt1000 sensing element. The input connector, LEMO Redel 2P series, is designed in plastic to enable sufficient isolation and clearances.
The KRYPTON series is designed to bring data acquisition systems closer to the sensor — the origin of the data. This should reduce the cost of the sensor cabling, lower the chance of wiring errors and improve the signal quality.
Phone: 07 3868 4255
The DRV-Z1 is a 3D digital viewer from Vision Engineering that can be utilised for a wide range...
Matrox Imaging has announced the Matrox 4Sight XV6 — an expandable vision controller...
With seven PCIe slots accepting full-height, full-length cards, the product offers I/O...