Matrox Rapixo CL Pro frame grabber

Wednesday, 24 June, 2020 | Supplied by: Dindima Group Pty Ltd



Matrox Imaging has announced the Matrox Rapixo CL Pro frame grabber, with support for high-performance Camera Link cameras. Each Pro board delivers onboard image processing offload to FPGA devices, high frame-rate image capture, support for extended cable lengths and good image acquisition.

The product makes use of an FPGA device from the Xilinx Kintex-7 family, directly integrating control, format and stream logic onto the frame grabber itself. Paired with the Matrox FDK, a powerful development kit, the Pro models support development of custom FPGA configurations to relieve the host system of intensive image-processing functions.

An enhanced iteration of the Matrox Radient eV series of Camera Link boards, the frame grabber capably handles image capture from an extensive range of devices, from a single low data-rate Camera Link device to multiple maximum-bandwidth Camera Link cameras. Users can interface with up to four Base or two Full/80-bit mode Camera Link cameras at up to 85 MHz on a single board. With integrated Power-over-Camera Link (PoCL) and extended cable lengths support, the Pro boards are designed to simplify cabling requirements.

Online: www.dindima.com
Phone: 03 9817 4087
Related Products

Spectrum M4i.44xx series PCIe digitisers

Spectrum Instrumentation's M4i.44xx series PCIe digitiser cards are fully equipped with...

Milestone XProtect 2020 R2 video management software

With Milestone Systems' XProtect video management software, the ambition is to enable users...

Silvertel Ag5412 high-efficiency PoE PD module

Silvertel announces the IEEE 802.3at compliant Ag5412 PD (powered device) — the first in a...


  • All content Copyright © 2020 Westwick-Farrow Pty Ltd