Würth Elektronik WR-COM series USB connectors

Thursday, 06 December, 2018 | Supplied by: Wurth Electronics Australia Pty

Würth Elektronik’s high-grade WR-COM series of USB connectors encompasses the USB 3.1 standard, as well as 3.0 and 2.0. The data rate of 10 Gbps (USB 3.1 Gen 2) and 100 W power supply output make USB 3.1 suitable for use in demanding industrial applications. The type C connectors and jacks come with long service life.

Due to their high-quality workmanship, the user-friendly USB 3.1 standard type C bidirectional connectors and jacks are set to become increasingly prevalent in industry as well as in the consumer sector. They offer good shielding and coating of the contact surfaces, saving on space for fast and flexible installation.

The horizontal type-C connector complies with the high-quality class of 10,000 mating cycles. It can be contacted into the ports in either mating direction and boasts dielectric strength up to 100 V and maximum contact resistance of 30 mΩ.

The series is suitable for the broad use of USB in industrial applications. The USB 3.1 Alternate Mode allows USB 3.1 hardware to be used to transmit data from other interface standards, such as HDMI, Ethernet, Thunderbolt or DisplayPort with audio and video signals.

Online: www.we-online.com
Phone: 03 8669 0610
Related Products

Raspberry Pi Power over Ethernet HAT add-on board

The Power over Ethernet HAT for the Raspberry Pi 3 Model B+ enables a Raspberry Pi to be powered...

WAGO 758-918 Wireless Ethernet Gateway

WAGO's Wireless Ethernet Gateway, which meets the IP65 degree of protection and has an...

Keysight DAQ970A Data Acquisition System

The DAQ970A Data Acquisition System, from Keysight, offers engineers an efficient way to fully...

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd