Thin film device developed to block electromagnetic interference

Researchers from Drexel University’s College of Engineering have developed a thin film device, fabricated by spray coating, that is designed to block electromagnetic radiation with the flip of a switch. The discovery was enabled by versatile two-dimensional materials called MXenes and could adjust the performance of electronic devices, strengthen wireless connections and secure mobile communications against intrusion.

The researchers, led by Yury Gogotsi, PhD, Distinguished University and Bach professor in Drexel’s College of Engineering, previously demonstrated that the two-dimensional layered MXene materials, discovered a little over a decade ago, when combined with an electrolyte solution, can be turned into an active shield against electromagnetic waves. The latest MXene discovery, reported in Nature Nanotechnology, shows how this shielding can be tuned when a small voltage is applied.

According to Gogotsi, dynamic control of electromagnetic wave jamming has been a technological challenge for protecting electronic devices working at gigahertz frequencies and a variety of other communication technologies. “As the number of wireless devices being used in industrial and private sectors has increased by orders of magnitude over the past decade, the urgency of this challenge has grown accordingly. This is why our discovery — which would dynamically mitigate the effect of electromagnetic interference on these devices — could have a broad impact,” Gogotsi said.

MXene is a highly conductive material that is suitable for reflective microwave radiation that could cause static/feedback or diminish the performance of communications devices. Its internal chemical structure can also be temporarily altered to allow these electromagnetic waves to pass through. This means that a thin coating on a device or electrical component prevents them from both emitting electromagnetic waves and being penetrated by those emitted by other electronics. Eliminating the possibility of interference from both internal and external sources can ensure the performance of the device, but some waves must be allowed to exit and enter when it is being used for communication.

“Without being able to control the ebb and flow of electromagnetic waves within and around a device, it’s a bit like a leaky faucet — you’re not really turning off the water and that constant dripping is no good. Our shielding ensures the plumbing is tight, so to speak — no electromagnetic radiation is leaking out or getting in until we want to use the device,” Gogotsi said.

The key to eliciting bidirectional tunability of MXene’s shielding property is using the flow and expulsion of ions to alternatively expand and compress the space between material’s layers, like an accordion, as well as to change the surface chemistry of MXenes. With a small voltage applied to the film, ions enter — or intercalate — between the MXene layers, altering the charge of their surface and inducing electrostatic attraction, which serves to change the layer spacing, the conductivity and the shielding efficiency of the material. When the ions are deintercalated, as the current is switched off, the MXene layers return to their original state.

The researchers tested 10 different MXene–electrolyte combinations, applying each via paint sprayer in a thin layer. The materials consistently demonstrated the dynamic tunability of shielding efficiency in blocking microwave radiation. The device also sustained the performance through more than 500 charge–discharge cycles. “These results indicate that the MXene films can convert from electromagnetic interference shielding to quasi-electromagnetic wave transmission by electrochemical oxidation of MXenes. The MXene film can potentially serve as a dynamic EMI shielding switch,” Gogotsi said.

For security applications, the MXene shielding could hide devices from detection by radar or other tracing systems. The team also tested the potential of a one-way shielding switch that would allow a device to remain undetectable and protected from unauthorised access until it is deployed for use.

“A one-way switch could open the protection and allow a signal to be sent or communication to be opened in an emergency or at the required moment. This means it could protect communications equipment from being influenced or tampered with until it is in use. For example, it could encase the device during transportation or storage and then activate only when it is ready to be used,” Gogotsi said.

The researchers will now explore additional MXene–electrolyte combinations and mechanisms to fine-tune the shielding to achieve a stronger modulation of electromagnetic wave transmission and dynamic adjustment to block radiation at a variety of bandwidths.

Image credit: iStock.com/Pobytov