ICP DAS PMC-5231M IIoT power meter concentrator
12 November, 2020 | ICP Electronics AustraliaICP DAS's PMC-5231M is a power meter concentrator for the energy monitoring and management applications of the Industry 4.0 age.
ICP DAS WISE-5231M intelligent IIoT edge controller
06 November, 2020 | ICP Electronics AustraliaICP DAS's WISE-5231M intelligent IIoT edge controller functions as a control unit for use in remote logic control and monitoring in various industrial applications.
iEi PPC-F15C-Q370 AI-ready modular panel PC
02 November, 2020 | ICP Electronics AustraliaiEi's PPC-F15C-Q370 panel PC is powered by an 8th Generation LGA1151 Intel Core i7/i5/i3 and Pentium Processor. It can be used as an inference computing system for AI applications.
ICP DAS XP-8031-WES7 PAC
26 October, 2020 | ICP Electronics AustraliaICP DAS's XP-8031-WES7 is a WES7-based PAC that combines computing, I/O and operator interface into a single unit.
ICP DAS UA-7555M OPC UA I/O module
22 October, 2020 | ICP Electronics AustraliaICP DAS's UA-7555M is an OPC UA I/O module that provides eight digital input channels and eight digital output channels. It also has a built-in two-port Ethernet switch to implement daisy-chain topology.
ICP DAS GW-2200i Modbus TCP/UDP to RTU/ASCII gateway
16 October, 2020 | ICP Electronics AustraliaICP DAS's GW-2200i module is a Modbus TCP/UDP to RTU/ASCII gateway that enables a Modbus TCP/UDP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network.
ICP DAS PM-3133-RCT series three-phase power meter
14 October, 2020 | ICP Electronics AustraliaICP DAS's PM-3133-RCT series smart power meters provide access to real-time electric usage for three-phase power measurement.
ICP DAS ECAT-2057P EtherCAT slave I/O module
12 October, 2020 | ICP Electronics AustraliaICP DAS's ECAT-2057P is equipped with the EtherCAT protocol and installed by daisy chain connection, which allows flexibility in device installation.
ICP DAS DL-100S-E remote temperature, humidity and dewpoint data logger
06 October, 2020 | ICP Electronics AustraliaICP DAS's DL-100S-E data logger can be used to record temperature, humidity and dewpoint information, including date and time stamps, and can store up to 600,000 downloadable records.
iEi DRPC-230-ULT5 fanless DIN-rail embedded PC supporting AI and PoE
01 October, 2020 | ICP Electronics AustraliaiEi's DRPC-230-ULT5 DIN-rail embedded system has a Whiskey Lake Core i5-8365UE processor pre-installed and supports 2 x DDR4 2400Hz SO-DIMM up to 32 GB (pre-installed 8 GB).
ICP DAS NSM-206PFT Ethernet switch
29 September, 2020 | ICP Electronics AustraliaICP DAS's NSM-206PFT is a 6-port unmanaged Ethernet switch featuring two fibre ports and supporting Power over Ethernet on ports 1 to 4.
iEi GPOE-6P PoE expansion module card
25 September, 2020 | ICP Electronics AustraliaiEi's GPOE-6P PoE expansion module card comes with six PoE ports with one slot capacity and is only 21.59 mm wide. It supports a 180 W power budget with a maximum of 60 W per port and has an individual cooler heatsink with a cooling fan.
iEi TANK-880-Q370 edge computing system
23 September, 2020 | ICP Electronics AustraliaiEi's TANK-880-Q370 is an embedded system for wide-range temperature environments. The high-performance edge computing system has four 2.5″ hard disk drive bays available that support RAID 0/1/5/10.
ICP DAS NSM-206PFC Ethernet switch
18 September, 2020 | ICP Electronics AustraliaICP DAS's NSM-206PFC is a 6-port unmanaged Ethernet switch featuring two fibre ports and supporting Power over Ethernet on ports 1 to 4.
ICP DAS CL-208-E remote data logger module
17 September, 2020 | ICP Electronics AustraliaICP DAS's CL-208-E data logger device can be used to record TVOC, temperature, humidity and dewpoint information, including date and time stamps, and can store up to 450,000 downloadable records.
