ICP DAS ET-2261-16 Ethernet I/O module
08 July, 2020 | ICP Electronics Australia Pty LtdProviding a variety of digital I/O functions, ICP DAS's ET-2261-16 is an IP-based Ethernet I/O monitoring and control module.
ICP DAS WISE-5231 Series Intelligent IIoT Edge Controller
25 June, 2020 | ICP Electronics Australia Pty LtdICP DAS's WISE-5231 Series Intelligent IIoT Edge Controller supports XV-board, allowing connections to I-7000 I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together.
ICP DAS I-9K and I-97K series I/O modules
15 June, 2020 | ICP Electronics Australia Pty LtdICP DAS's I-9K (analog I/O) and I-97K (digital I/O) series I/O modules are suitable for combining a variety of I/O functions within the WP-9000, XP-9000, LX-9000 and LP-9000 programmable automation controllers (PACs).
ICP DAS iKAN series industrial Modbus LED displays
08 June, 2020 | ICP Electronics Australia Pty LtdICP DAS's iKAN series is a family of industrial Modbus LED displays that deliver industrial-grade anti-noise capabilities as well as stability.
iEi PulM-10G4SF-XL710-BP network interface controller
28 May, 2020 | ICP Electronics Australia Pty LtdThe PulM-10G4SF-XL710-BP, iEi's smart network interface controller, is designed to resolve networking overhead to make packet processing faster and more efficient than with standard CPUs.
iEi DRPC-310-AL fanless DIN rail embedded system
22 May, 2020 | ICP Electronics Australia Pty LtdiEi's DRPC-310-AL fanless DIN rail embedded system is powered by the Intel Atom x5-E3930 processor. It is designed for harsh environment applications and supports DIN rail mounting.
iEi IDS-310-AL fanless digital signage system
20 May, 2020 | ICP Electronics Australia Pty LtdiEi's IDS-310-AL series fanless embedded system is preinstalled with 4 GB of DDR3L SO-DIMM and can accommodate up to 8 GB of DDR3L memory.
ICP DAS GPS-721U-MRTU remote GPS receiver module
11 May, 2020 | ICP Electronics Australia Pty LtdICP DAS's GPS-721U-MRTU, a remote GPS receiver module, is designed to ensure high sensitivity and low power consumption with an ultrasmall form factor and supports the NMEA 0183 GPS protocol.
iEi PAC-400AI-C236 artificial intelligence system
28 April, 2020 | ICP Electronics Australia Pty LtdiEi's PAC-400AI-C236 half-size AI system is powered by the Intel Xeon E3-1275 v5 CPU (3.6 GHz, Quad Core, TDP 80 W) with pre-installed 16 GB ECC DDR4 SO-DIMM memory.
ICP DAS DL-300-WF-IP65 remote data logger module
27 April, 2020 | ICP Electronics Australia Pty LtdThe ICP DAS DL-300-WF-IP65 series is a gas detector monitoring module with Wi-Fi, Ethernet and RS-485 interfaces. It provides a WLAN connection that complies with the IEEE802.11b/g/n standards.
ICP DAS I-7565M-FD USB to CAN/CAN FD bus converter
17 April, 2020 | ICP Electronics Australia Pty LtdICP DAS's I-7565M-FD is a USB to CAN/CAN FD (CAN with flexible data-rate) converter with two CAN channels.
iEi PUZZLE-IN004 rackmount network appliance
14 April, 2020 | ICP Electronics Australia Pty LtdiEi's PUZZLE-IN004 is a 1U rackmount network appliance that enables fast multitasking with low power consumption.
iEi IMBA-H112 ATX motherboard
03 April, 2020 | ICP Electronics Australia Pty LtdiEi's IMBA-H112 is an ATX motherboard that supports a Socket LGA1151 Intel Core i7/i5/i3, Pentium or Celeron processor and two 288-pin 2133 MHz dual-channel DDR4 DIMMs up to 64 GB.
iEi PulM-1G4T-I211(BP) network interface card
27 March, 2020 | ICP Electronics Australia Pty LtdThe PulM-1G4T-I211 and PulM-1G4T-I211-BP network interface cards (NICs) come with 4x RJ-45 connector ports, 1x Intel Ethernet connector I211-AT and 4x PCIe 2.0 x2. The PulM-1G4T-I211-BP comes with a LAN bypass for fault tolerance.
ICP DAS ECAT-2092T EtherCAT incremental encoder counter
13 March, 2020 | ICP Electronics Australia Pty LtdICP DAS's EtherCAT slave ECAT-2092T is an incremental encoder counter that provides two independent high-speed counter channels. It reads the pulse train generated by an incremental encoder and can be used in positioning feedback applications.
