Products

TDK MHQ1005P multilayer ceramic inductor range

17 April, 2012 | TDK Australia

TDK has released the MHQ1005P series of multilayer ceramic inductors with a Q factor that, depending on the type, is as good or much better than comparable, wirewound inductors.

Westcode Semiconductors rectifier stack range

16 April, 2012 | Semikron Danfoss

Westcode Semiconductors has introduced a standard assembly module that provides the basic building block for the Westack range of assemblies of up to 10,000 A.

IEI Technology KINO-DH610 mini-ITX with HD graphics engine

12 April, 2012 | ICP Electronics Australia

IEI Technology's KINO-DH610, a mini-ITX with HD graphics engine, is an energy-efficient mini-ITX SBC with an LGA1155 socket for Core i5/i3/Pentium /Celeron processors, featuring up to 16 GB 1333/1066 MHz dual-channel DDR3 SDRAM with SO-DIMM suport.

Avalue Technology ECM-LX800 form-factor SBC

12 April, 2012 | Backplane Systems Technology Pty Ltd

Avalue Technology’s 3.5″ EPIC small form-factor SBC for low power consumption needs, the ECM-LX800, has low power consumption, high performance and small size.

IEI Technology IVCE-C604 PCIe video/audio capture card

12 April, 2012 | ICP Electronics Australia

IEI Technology’s IVCE-C604, PCIe video/audio capture card has a four-channel video/audio input and total 120 fps at D1 for four channels (NTSC).

iBase iPPC15A7-RE industrial panel PC

12 April, 2012 | Backplane Systems Technology Pty Ltd

The iPPC15A7-RE, iBase’s fanless modularised 15″ industrial panel PC, features a dual-core Atom Processor D2700, as well as flexible expansion capabilities.

Hoffman MaxRack high-density rack

12 April, 2012 | Pentair

The fully featured Hoffman brand MaxRack high-density rack is designed to offer high static load capacity while providing thermal and cable management capabilities in a single solution.

Maestro Wireless Solutions cellular CDMA 1xRTT modems

12 April, 2012 | Wireless Components

A family of rugged cellular CDMA 1xRTT modems for M2M applications from Maestro Wireless Solutions has been released.

PMI PVVAN-0R4G6G-40-MP-1 diode attenuator

12 April, 2012 | Mostyn Enterprises (Technologies) Pty Ltd

PMI PVVAN-0R4G6G-40-MP-1 is a non-reflective, linearised, voltage-controlled pin diode attenuator that operates over the 400 MHz to 6.0 GHz frequency range and provides up to 40 dB attenuation range from 0 to +10 VDC control voltage.

Phoenix Contact Heavycon compact plug connector range

12 April, 2012 | Phoenix Contact Pty Ltd

The compact design of Heavycon compact plug connectors from Phoenix Contact supports the trend toward ever-smaller devices in automation.

WL Gore PhaseFlex 18 GHz cable assembly

12 April, 2012 | WL Gore & Associates

A rugged 18 GHz cable assembly has been added to the PhaseFlex microwave/RF test assemblies range.

Cisco EnergyWise ePDU upgrade

11 April, 2012 | Eaton Electrical (Australia) Pty Ltd

New functionalities have been announced for intelligent enclosure power distribution units (ePDUs), including support for Cisco EnergyWise power management, the ability for users to define customised outlet groups, a power scheduling function for planned shutdowns, and mass configuration and mass upgrade of ePDUs.

Crystek 26.5 GHz coaxial cable range

11 April, 2012 | Wireless Components

A range of 26.5 GHz hand formable coaxial cable assemblies has been introduced by Crystek, an addition to low-loss RF coaxial cables.

Times Microwave Systems EZ-400-BM BNC/EZ-400-BM-RA BNC connector range

11 April, 2012 | Rojone Pty Ltd

The EZ-400-BM BNC no-solder male (plug) straight connector and EZ-400-BM-RA BNC no-solder, male (plug) right angle connector for LMR-400 low loss coaxial cable are now available.

Times Microwave Systems CST-600 all-in-one combination prep tool

11 April, 2012 | Rojone Pty Ltd

The CST-600 all-in-one combination prep tool is for use with LMR-600 low loss coaxial cables.

  • All content Copyright © 2025 Westwick-Farrow Pty Ltd