Neutrik etherCON series RJ45 connector system
27 September, 2011 | Amber Technology Limited
Neutrik’s etherCON series is a ruggedised and lockable RJ45 connector system designed to withstand the demands of professional audio and video network applications.
Canare mini 75 ohms coax connector range
27 September, 2011 | Amber Technology Limited
Canare has announced a range of mini 75 Ω coax connectors designed to DIN 1.0/2.3 standard.
Canare L-4.5CHWS precision 75Ω coaxial cable
27 September, 2011
| Amber Technology Limited
Canare’s L-4.5CHWS precision 75 Ω coaxial cable is suitable for broadcasters requiring high technical performance combined with the durability and flexibility required for outside broadcasts.
IHLP-3232CZ-01 low-profile, high-current inductor
27 September, 2011 | Braemac Pty Ltd
Vishay has launched an IHLP low-profile, high-current inductor in the 3232 case size with a 3.0 mm profile.
Keystone vertical entry lithium coin cell holder range
26 September, 2011 | NPA Pty Ltd
Keystone has introduced a range of vertical entry, lithium coin cell holders for use with portable medical and other electronic devices.
TDK-EPC EPCOS EP5 SMT pulse transformer range
23 September, 2011 | Arrow Electronics Australia Pty Ltd
TDK-EPC, a group company of TDK, has developed a series of EPCOS EP5 SMT pulse transformers, used to couple gate-drive circuits to MOSFETs and IGBTs operating at switching frequencies within a range of 150 kHz to several MHz.
Harting har-port service interface range
22 September, 2011 | HARTING Pty Ltd
har-port is an addition to the range that offers service interfaces for ethernet and USB and makes control units and industrial computer interfaces accessible from the outside.
Advantech DAQ Navi application
22 September, 2011 | Advantech Australia Pty Ltd
A DAQ Navi application configures PCI, USB and PCI-104 data acquisition devices and includes the software development kit, device driver and device test utility with user guide to replace the previous multiple drivers, device manager and SDK.
iBASE CMI211-6COM scalable Mini-ITX system
22 September, 2011 | Backplane Systems Technology Pty Ltd
iBASE’s CMI211-6COM scalable Mini-ITX system is equipped with a Mini-ITX motherboard with either an Intel or AMD processor with a TDP of up to 65 W. In addition to the I/O ports on the board installed, the device also offers 6 x COM and 2 x USB ports. This system will support 1 x 2.5″ SATA HDD drive plus 1 x PCI slot.
Advantech APAX-5090P communication module
22 September, 2011 | Advantech Australia Pty Ltd
The APAX-5090P, 4-port (RS232/422/485) communication module for the APAX-5570 programmable automation controller series allows two modules to be attached to a single APAX-5570 unit, expanding the number of communication ports to eight.
Advantech EKI-6528TI/EKI-6528TPI PoE switch range
22 September, 2011 | Advantech Australia Pty Ltd
Advantech has announced the EN50155 certification of its unmanaged ethernet switches: EKI-6528TI and EKI-6528TPI PoE switch. The switches are designed to transmit data for many applications such as video surveillance systems and carriage status monitors on high-speed rail lines, subways, trams or buses.
IEI MODAT-100 mobile POS terminal
22 September, 2011 | ICP Electronics Australia
IEI has released MODAT-100, a mobile POS terminal for seamless wireless communication.
Advantech AIMB-769 ATX motherboard
22 September, 2011 | Advantech Australia Pty Ltd
An industrial-grade ATX motherboard is suitable for cost-sensitive industrial applications requiring high-performance and expansion capability for factory automation, medical image processing, digital surveillance and telecommunications applications.
Flexus FX100 audio analysis system
21 September, 2011 | Amber Technology Limited
The Flexus FX100 audio analysis system for research, design, audio service and production applications has a modular design allowing the system to be configured for a wide range of applications.
Harting Han Ground connector series
21 September, 2011 | HARTING Pty Ltd
Han Ground is a connector series that makes it possible to execute grounding systems in a pluggable design. The advantage is quick and error-free commissioning. Potential equalisation lines are still being permanently connected, however, which is relatively time-consuming and can be subject to errors. The latest single-pole connectors, in an IP 65 plastic housing, are designed for stranded wires from 10-35 mm2 and are optionally available in crimp or axial screw termination.
