Components > Controllers

Linear Technology LTC3891 high-voltage synchronous step-down DC/DC controller

15 November, 2010 by

Linear Technology has introduced the LTC3891, a high-voltage synchronous step-down DC/DC controller that draws 50 µA in standby mode with the output in regulation.


Linear Technology LTC3787 DC/DC controller

19 October, 2010 by

Linear Technology has announced the LTC3787, high-power, two-phase single output synchronous step-up DC/DC controller, which replaces the boost diodes with high efficiency N-channel MOSFETs.


Linear Technology LTC3787 DC/DC controller

19 October, 2010

Linear Technology has announced the LTC3787, high-power, two-phase single output synchronous step-up DC/DC controller, which replaces the boost diodes with high efficiency N-channel MOSFETs.


Linear Technology LTC4365 protection controller

22 September, 2010 by

Linear Technology has introduced the LTC4365, an overvoltage, undervoltage and reverse protection controller, with a -40 to 60 V range, for applications that require windowed supply protection.


Maxim MAX5971B single-port power-sourcing equipment controller

22 September, 2010

Maxim has introduced the MAX5971B, a single-port power-sourcing equipment controller for IEEE 802.3af/at-compliant, high-power power-over-ethernet applications.


Maxim MAX11836 TacTouch haptic actuator controller

06 September, 2010 by

Maxim has introduced the MAX11836, a TacTouch haptic actuator controller for single-/multilayer piezo actuators and electroactive polymers (EAPs) in touch-enabled devices.


Maxim DS1876 SFP+ video controller

06 September, 2010 by

Maxim has introduced the DS1876, an SFP+ video controller with a dual laser diode driver interface. The device controls and monitors all transmitter functions for SFP+ optical modules and fully supports the SFF-8472 specification.


Maxim MAX5970 dual hot-swap controller

28 July, 2010 by

Maxim has released the MAX5970, a dual hot-swap controller for systems with two 0 to 16 V supplies.


RabbitCore RCM4010 module

19 July, 2010

The RabbitCore RCM4010 module has been embedded into Elby Design’s Be-Station audio and lighting interface and enables wireless control of audio and lighting equipment, minimising the costs, as well as the risks of accident or failure, associated with long cable runs.


IEI IceRock-08A fanless industrial tablet PC

19 July, 2010

The IceRock-08A fanless industrial tablet PC with 8 touch screen has been released.


National Instruments PXIe-8133 embedded controller

16 June, 2010 by

The PXIe-8133 embedded controller features the quad-core Core i7-820QM processor.


IEI WStrider-200A embedded controller

08 June, 2010 by

IEI’s WStrider-200A is an embedded controller designed to operate in harsh environments. Its aluminium die-casting enclosure and M12 watertight connector not only provide IP67-grade protection against dust and water, but it can also withstand high impact.


Aaeon AEC-6915 Revision B fanless industrial PC controller

17 May, 2010 by

Interworld has released the AEC-6915 Revision B fanless industrial PC controller from Aaeon. It features a dual core processor and 4-PCI expansion slots allowing users to expand the system to fulfil a diverse range of requirements.


Linear Technology LT4180 DC/DC controller

14 May, 2010 by

Linear Technology has released the LT4180, a virtual remote sense DC/DC controller that eliminates the remote sense wires required to compensate for the voltage drop in cables, wires and circuit board trace runs.


Linear Technology LTC4361 protection controller

11 May, 2010 by

Linear Technology has introduced the LTC4361, a 2.5 to 5.5 V overvoltage and overcurrent protection controller designed to safeguard low voltage, portable electronics from damaging input voltage transients and current surges.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd