National Instruments PXIe-8133 embedded controller
16 June, 2010 byThe PXIe-8133 embedded controller features the quad-core Core i7-820QM processor.
IEI WStrider-200A embedded controller
08 June, 2010 byIEI’s WStrider-200A is an embedded controller designed to operate in harsh environments. Its aluminium die-casting enclosure and M12 watertight connector not only provide IP67-grade protection against dust and water, but it can also withstand high impact.
Aaeon AEC-6915 Revision B fanless industrial PC controller
17 May, 2010 byInterworld has released the AEC-6915 Revision B fanless industrial PC controller from Aaeon. It features a dual core processor and 4-PCI expansion slots allowing users to expand the system to fulfil a diverse range of requirements.
Linear Technology LT4180 DC/DC controller
14 May, 2010 byLinear Technology has released the LT4180, a virtual remote sense DC/DC controller that eliminates the remote sense wires required to compensate for the voltage drop in cables, wires and circuit board trace runs.
Linear Technology LTC4361 protection controller
11 May, 2010 byLinear Technology has introduced the LTC4361, a 2.5 to 5.5 V overvoltage and overcurrent protection controller designed to safeguard low voltage, portable electronics from damaging input voltage transients and current surges.
Linear Technology H- and MP-grade versions of LT3757 and LT3758 DC/DC controllers
22 April, 2010 byLinear Technology has announced the H- and MP-grade versions of the LT3757 and LT3758 wide input range DC/DC controllers for boost, flyback, SEPIC and inverting power supply applications. They are capable of generating either a positive or negative regulated output voltage with a single device by having two internal voltage feedback error amplifiers and reference voltages, and have operating junction temperature ranges from -40 to 150°C and -55 to 125°C.
Linear Technology LTC3859 DC/DC controller
22 April, 2010 byLinear Technology has introduced the LTC3859, a triple output (buck, buck, boost), low quiescent current synchronous DC/DC controller that maintains all output voltages in regulation during motor vehicle cold crank conditions.
Siemens Simatic CPU 317TF-2DP controller
22 April, 2010 byThe Simatic CPU 317TF-2DP controller enables motion control, safety and standard tasks in one device. It uses PLCopen-compatible motion control blocks. It is suitable for applications from controlled single-axis positioning to complex, synchronised sequences of motion, eg, geared synchronous motion, curve synchronisation or print mark correction.
Talk between machines is getting louder
20 April, 2010M2M or machine to machine refers to data communications between machines. To a large degree, the term has started to be used more to describe the communications between machines over a wireless link - in other words, wireless telemetry.
Linear LTC3855 synchronous step-down DC/DC controller
03 March, 2010 byLinear has introduced the LTC3855, a dual-output high-efficiency (up to 95%) synchronous step-down DC/DC controller with multiphase operation, differential output voltage sensing and integrated phase-lock loop (PLL) synchronisation.
OEM Technology Solutions PC3 programmable controllers
26 February, 2010OEM Technology Solutions has partnered with ISaGRAF to demonstrate the PC3 programmable controllers for the rail industry.
Linear Technology LTC3775 DC/DC switching regulator controller
10 February, 2010 byLinear Technology has announced the LTC3775, a low minimum on-time wide input voltage range synchronous step-down DC/DC switching regulator controller that drives all N-channel power MOSFET stages.
ICP Electronics ACT-457A access controller and proximity reader
10 February, 2010ICP Electronics has released the ACT-457A all-in-one access controller and proximity reader with Windows CE5.0 pre-installed, enabling easy set-up and programming without an additional on-site computer.
PC1600 programmable controllers
04 December, 2009 byOEM Technology Solutions has released the PC1600 series of programmable controllers that offer good functionality for industrial applications. The series has an extensive range of I/O, communication ports, data storage and data manipulation capabilities and has been designed to operate in tough industrial environments such as: remote environmental monitoring; SCADA systems; energy management and control; data and event logging; distributed control systems; transport control and monitoring.
JTAG Technologies DataBlaster JT 37x7/PCIe controller
13 November, 2009 byJTAG Technologies has announced the DataBlaster JT 37x7/PCIe boundary scan range which supports the PCI-express slot format.
