Components > Controllers

ICP DAS I-8123W-CPS CANopen slave module

04 December, 2013

ICP Electronics Australia has released ICP DAS's I-8123W-CPS one-port CANopen slave module. As a stand-alone CAN controller, the product is suitable for CANopen applications and be a CANopen slave device on the CANopen network.

Saelig W5500 Fast SPI Ethernet Controller IC

25 November, 2013

The W5500 Fast SPI Ethernet Controller IC is a hardwired TCP/IP ethernet controller that provides internet connection to embedded systems by using a single chip in which the TCP/IP stack, 10/100 Ethernet MAC and PHY are embedded. The TCP/IP Core is composed of a fully hardwired, 10BaseT/100BaseTX TCP/IP stack with an integrated Ethernet MAC and PHY which supports TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE protocols.

Microchip Technology MCP19111 analog power controller

31 October, 2013

The MCP19111 is a mid-voltage (4.5-32 V), analog-based PWM controller range with an integrated 8-bit PIC microcontroller. The product combines the performance of a high-speed analog solution with the configurability and communication interface of a digital solution.

Adlink AMP-204C/AMP-208C pulse train motion controllers

02 October, 2013

The AMP-204C/AMP-208C DSP-based 4-/8-axis advanced pulse train motion controllers enable high pulse output and encoder input frequency up to 6.5 and 20 MHz respectively.

Microchip MCP19111 power management controller

01 September, 2013

Microchip's MCP19111 power management controller combines the flexibility and I2C communication of digital DC/DC power conversion with the speed, performance and resolution of analog-based control.

National Instruments cRIO-9068 software-designed controller

14 August, 2013

The NI cRIO-9068 software-designed controller has been completely redesigned but maintains full NI LabVIEW and I/O compatibility with the CompactRIO platform. The controller integrates state-of-the-art technologies like the Xilinx Zynq-7020 All Programmable system on a chip (SoC), which combines a dual-core ARM Cortex-A9 processor and Xilinx 7 Series FPGA fabric.

ICP DAS ISaGRAF PAC application for event data delivery

19 July, 2013

ICP DAS has released an application about how to deliver event data via UDP/TCP communication by ISaGRAF PAC to remote in sequence.

Barracuda application delivery controller (ADC)

23 May, 2013

The Barracuda application delivery controller (ADC) is an integrated solution that combines load balancing, application acceleration, application control and web application security into a single, high-performance platform.

Bestech capaNCDT 6220 capacitive sensor controller

22 May, 2013

Bestech has released a range of modular-designed capaNCDT 6220 capacitive sensor controllers for non-contact displacement and position measurements. The controllers features four measurement channels and provide the user with the ability to add or remove channel modules.

Osram Ostar Stage LEDs

19 April, 2013

The Osram Ostar Stage LEDs from Osram Opto Semiconductors offer luminance of 48 million candelas per square metre and tunable colour tones from cold white to warm white.

Neousys Nuvo-1300af i7 fanless embedded controller

26 March, 2013

The Neousys Nuvo-1300af from Madison Technologies is claimed to be the world’s first i7 fanless embedded controller with integrated gigabit PoE ports.

ICP DAS WISE-5801 intelligent data logger PAC controller

20 February, 2013

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications.

MEN Mikro Elektronik F75P CompactPCI PlusIO SBC

30 November, 2012

The MEN Mikro Elektronik F75P CompactPCI PlusIO SBC unites the benefits of a 1oo2 multiprocessing system and the ruggedness and flexibility of the CompactPCI PlusIO standard on one single card.

Microchip dsPIC33FJ09GS302 DSCs

30 November, 2012

Microchip Technology has released the dsPIC33 GS family of digital signal controllers (DSCs).

National Instruments RMC-8355 rackmount controller and PXIe-PCIe8381 PXI Express remote controller

20 November, 2012

National Instruments has extended the PXI platform with the NI RMC-8355 rack-mount controller and the NI PXIe-PCIe8381 PXI Express remote controller. They deliver high data-streaming performance, expanding PXI platform capabilities to include PC control from off-the-shelf computing platforms.

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd