National Instruments FPGA adapter modules
06 December, 2010National Instruments has introduced four adapter modules for its FlexRIO product family that provide FPGA-based reconfigurable I/O (RIO) for PXI systems, using the LabVIEW FPGA module software.
Linear Technology LTM9004/LTM9005 RF-to-digital µModule receivers
03 November, 2010 byLinear Technology has introduced the LTM9004 and LTM9005, two RF-to-digital µModule receivers that integrate the key components for 3G and 4G base station receivers (WCDMA, TD-SCDMA, LTE, etc) and smart antenna WiMAX base stations.
Future Technology Devices DB9-USB-RS232 module range
12 October, 2010 byFuture Technology Devices has available the DB9-USB-RS232 range of modules, designed to replace a DB9-based RS232 connector, on an existing board design, with a USB 2.0 connector interface.
Future Devices Technology Morph-IC-II FPGA platform
12 October, 2010 byFuture Devices Technology has launched a flexible development platform that speeds the creation of FPGA-based applications and simplifies the integration of hi-speed 480 Mbps USB communication in advanced logic circuit designs.
RTD Embedded Technologies ECAN527HR module
08 October, 2010 byRTD Embedded Technologies has introduced the ECAN527HR module that provides direct interface between PC/104 and CANbus.
National Instruments PXIe-4331 data acquisition module
23 September, 2010 byThe PXIe-4331 is the latest in the SC Express family of high-performance data acquisition modules with built-in signal conditioning.
Radiocrafts RC232 embedded wireless module range
22 September, 2010 byA range of Radiocrafts RC232 embedded wireless modules and expansion boards for Australia and New Zealand is designed to integrate into the Sierra Wireless 3G Fastrack modem, creating a short-range wireless hub that can then connect over 3G to the outside world.
Linear Technology LTC5588-1 I/Q modulator
22 September, 2010 byLinear Technology has introduced the LTC5588-1, the latest generation of an ultra-high linearity direct conversion I/Q modulator that operates over a wide frequency range from 200 MHz to 6 GHz. The device offers linearity performance of 30.9 dBm OIP3 (output third-order intercept) at 2.14 GHz - without calibration.
Koloona 5008 series power modules
16 September, 2010 byThe 5008 series of power modules combines an IEC C8 inlet with a line filter for low-power applications. The EMI filter is a one-stage filter for rated currents up to 2.5 and 6 A for IEC and UL and is available as standard or medical versions.
Acces I/O Products PICO-II8IDO4A multifunction module
16 September, 2010 byPICO-II8IDO4A from Acces I/O Products is designed for expansion on Pico-ITXe single board computers. This dense, multifunction product features eight individually optically isolated inputs, four fully protected solid-state FET outputs capable of switching up to 3 A each and two 16-bit analog inputs.
RF Micro Devices RF3858 front end module
16 September, 2010 byRF Micro Devices has available the RF3858 front-end module that supports multiple tx/rx applications in the 900 MHz ISM band, including smart energy/advanced metering infrastructure.
National Semiconductor Simple Switcher power modules
16 September, 2010 byNational Semiconductor has introduced nine Simple Switcher power modules that feature an extended operating temperature range and vibration and drop testing for use in harsh environments.
OEM serial port adapter 433 module
17 August, 2010 byOffering a range of 1.2 km, the OEM serial port adapter 433 module also has high throughput and the extended data mode protocol which makes individual data channel communication possible for each unit in the seven-slave multipoint network.
Fluke DTX-MFM multimode fibre module
13 August, 2010 byThe Fluke DTX-MFM multimode fibre module for the DTX cable analyser is now available for rent.
Linx Technologies relay function module 2
13 August, 2010Linx Technologies has released the relay function module 2, another member of the Linx pre-certified OEM product range.
