Electronic skin could help people with disabilities
17 July, 2019Anusha Withana is developing a superthin, hyper-flexible sticky tape that can have electronic circuits printed onto it.
Reid Print Technologies printed electronics manufacturing
17 July, 2019 | Supplied by: Reid Print TechnologiesReid Print Technologies has the engineering and production capabilities required to develop, design, manufacture, assemble and supply flexible printed electronics such as smart flexible sensors.
Würth Elektronik WL-SMCC LED series
12 July, 2019 | Supplied by: Wurth Electronics Australia PtyThe WL-SMCC series of SMT chip LEDs, available in 0402 and 0603 packages, is characterised by a full-surface lens design and a high light intensity.
Würth Elektronik WE-LAN AQ LAN transformer
11 July, 2019 | Supplied by: Wurth Electronics Australia PtyThe WE-LAN AQ is a LAN transformer manufactured by a fully automated production process. Its innovative coil winding technique reduces the electrical variation while improving performance over a wide frequency range.
Daylight Omega 7 ESD Magnifier lamp
11 July, 2019 | Supplied by: Mektronics Co Pty LtdThe Daylight Omega 7 ESD Magnifier is an ergonomic and professional magnifying lamp that uses carbon fibre and special conductive coatings to ensure 100% ESD compliance for the lifetime of the magnifier.
MACOM MAMG-100227-010C0L broadband power amplifier module
10 July, 2019 | Supplied by: Mouser ElectronicsThe MACOM MAMG-100227-010C0L is a fully matched 10 W power amplifier module based on gallium nitride-on-silicon (GaN-on-Si) technology.
Universal computer memory could replace DRAM
10 July, 2019The inventors of the device used quantum mechanics to solve the dilemma of choosing between stable, long-term data storage and low-energy writing and erasing.
APEM IX Series push-button
09 July, 2019 | Supplied by: Control Devices AustraliaThe IX Series push-button, from APEM, combines the qualities of the IP and IA series with a backlit switch.
congatec SMARC 2.0 Quick Starter Kit
09 July, 2019 | Supplied by: Congatec Australia Pty LtdThe SMARC 2.0 Quick Starter Kit for the NXP i.MX 8 QuadMax processor family, from congatec, is said to offer everything developers need for the immediate evaluation of the NXP i.MX 8 processor.
Architecture developed for ultrahigh-speed wireless networks
08 July, 2019Researchers have developed ubiquitous, robust, flexible, interoperable and cost-effective wireless network technology that operates in previously unused high-frequency bands.
Suba Engineering laser marking technology
04 July, 2019 | Supplied by: Suba EngineeringSuba Engineering's 20 W fibre laser marker is made to fit onto a conveyor, and is a smart way to process parts that need identification.
Touch in flexible displays: which technologies will prevail?
02 July, 2019 by Dr Khasha Ghaffarzadeh, Research Director | Supplied by: IDTechExHow will different technology options fare given that the paradigm shift towards flexible displays is finally upon us?
Raspberry Pi 4 Model B Computer
02 July, 2019 | Supplied by: element14The Raspberry Pi 4 Model B Computer is three times faster compared to its predecessor, the Raspberry Pi 3 B+.
Buck/boost module to extend battery life of IoT applications
01 July, 2019 by Jordi Torrebadell, Representative Director, RECOM Power Japan K.K. | Supplied by: RECOM Power GmbHThe RBB10-2.0 series is a 4 A non-isolated buck/boost regulator power module where the input voltage can be higher, lower or the same as output voltage.
Advantech ARK-1220L fanless embedded box PC
01 July, 2019 | Supplied by: Advantech Australia Pty LtdThe ARK-1000 series are lower power consumption, fanless embedded box PCs that offer sufficient storage and expansion capability for easy implementation.
