The CHK Miro PQ45 Power Quality Analyzer is a weatherproof and compact analyser that is certified to IEC61000-4-30, Class A.
The Hioki PW3390 power analyser is suited to mains power frequency and power electronics, high-frequency power measurements such as solar and wind farms, variable speed drives and electric vehicles.
Anritsu introduces the frequency selectable RF power analyser, Power Master MA24507A. The ultraportable power analyser enables simple, numeric, frequency-based measurement of RF power from 9 kHz to 70 GHz.
STMicroelectronics has upgraded its 16 V CMOS dual and quad analog comparators using the latest process technology to achieve low typical current consumption of 5 µA per comparator, as well as fast propagation time and increased ESD capability of up to 4 kV.
STMicroelectronics' TS985 comparator combines battery-friendly micropower performance with enhanced dynamic range and high speed.
The R&S HMC8015 power analyser is a compact tester for AC/DC load and standby current characterisation that enables measurements without additional tools such as a computer or remote infrastructure.
The PA3000 is a 1- to 4-channel AC/DC power analyser optimised for testing single- and multiphase high-efficiency AC/DC and DC/AC power supply designs. The multichannel power analyser features 10 mW standby power measurement capabilities and 1 MHz bandwidth.
The LTC6752 is a family of high-speed comparators capable of supporting toggle rates up to 280 MHz. The comparators exhibit low propagation delays of 2.9 ns and fast rise/fall times of 1.2 ns.
Available to rent, the Anritsu Site Master S331L Cable and Antenna Analyser is suitable for work with legacy networks, as well as installations of newer 3G and 4G networks.
element14 is the master reseller of the Tektronix PA1000 power analyser. The product provides highly accurate power measurements on single-phase power-electronic products.
The Tektronix PA4000 power analyser delivers consistently accurate measurements, even with challenging power waveforms. While most power analysers rely on zero-crossing point to detect and track fundamental frequency, the analyser uses a unique method to lock onto signals, no matter how complex.
The Infiniium 9000 H-Series high-definition oscilloscopes come in bandwidths of 250 MHz, 500 MHz, 1 GHz and 2 GHz.
The Hioki 3193-10 Power HiTester is suitable for voltage, current, voltage/current peak, active power, reactive power, apparent power, power factor, phase angle, frequency, current integration, power integration, load rate and efficiency measurement (eg, motor drives) for circuits including single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and three-phase 4-wire systems.
With simple one-button operation, the Hioki 3196 power quality analyser can record voltage, current, pf, f(Hz), kVA, kVAr, kW, harmonics (THD and individual to 50th order) and flicker (IEC6100-4-15).The analyser is available to rent.
The 430 series II three-phase power quality analysers are said to be the first tools to use a patented algorithm to measure energy waste and quantify its cost.