MORNSUN URF48xxQB-100WR3 18–75 V ultrawide input voltage DC/DC converter
01 August, 2017MORNSUN's latest 100 W DC/DC converter, the URF48xxQB-100WR3 series, has ultrawide input voltage of 18–75 V and can be widely used in industrial control, communication, electrical generation and railway applications.
Wurth Electronics Energy Harvesting Solution To Go Kit
14 July, 2017The Wurth Electronics Energy Harvesting Solution To Go Kit is a complete solution that allows developers to add energy harvesting, energy management and storage to their application. The kit features an energy harvesting board and an Energy Micro Giant Gecko Starter Kit.
RECOM RAC01-G and RAC02-G series AC/DC converters
01 July, 2017The RAC01-G (1 W) and RAC02-G (2 W) series converters were specially designed to continuously and efficiently power smart building infrastructures. They accept a broad nominal input voltage range from 100 to 240 VAC for worldwide use.
Mornsun LS series low-power AC/DC converter
29 June, 2017Mornsun offers a range of single inline low-power AC/DC converters that are suitable for IoT, smart devices and building automation applications.
Maxim MAX17572 and MAX17574 Himalaya step-down DC-DC converters
14 June, 2017With the MAX17572 and MAX17574 Himalaya synchronous step-down DC-DC converters, designers can operate 4.5 to 60 V, as well as reduce power dissipation and solution size to comply with the IEC 61508 safety standard.
Vicor BCM6123TD1E2663Txx fixed ratio DC-DC converter module
31 May, 2017The Vicor BCM6123TD1E2663Txx is a high-density, high-efficiency, fixed ratio DC-DC converter module in a ChiP package, which operates from a 384 VDC nominal input and delivers an isolated and safety extra low voltage (SELV) 24 V secondary output.
Wearable electronics could be powered by body motion
23 May, 2017Researchers have been investigating the ability of triboelectric nanogenerators (TENGs) — small devices that convert movement into electricity — to create wearable electronics powered solely by the wearer's day-to-day body motion.
RECOM R1SX series 1 W DC/DC converters
01 May, 2017RECOM's R1SX series has a nearly 20% lower profile than the industry standard due to its inverted transformer design. The 1 W DC/DC converters are suitable for bus isolation and a wide range of industrial automation control equipment.
RECOM RSE and RSOE regulated SIP8 DC/DC converters
01 April, 2017RECOM's regulated DC/DC converters RSE (2 W) and RSOE (1 W) series were developed for a variety of industrial, transport, test and measurement applications which require onboard 5 V power supplies.
1950s energy converter reinvented with graphene
07 March, 2017US researchers have updated the process of thermionic energy conversion for the 21st century, using wonder material graphene as a key part of the technology.
Mornsun QAxx1 series DC/DC converter
02 March, 2017The Mornsun QAxx1 series DC/DC converter is specialised for IGBT drivers.
Mornsun LO10-26D0512-04L and LO20-10C0512-01 LO Series AC/DC converters
28 February, 2017The Mornsun LO10-26D0512-04L and LO20-10C0512-01 LO Series AC/DC converters are designed to be cost-effective.
Vicor DCM in a VIA Package modular DC-DC converter
20 February, 2017The DCM in a VIA Package is a ruggedised, modular DC-DC converter that operates from an unregulated, wide-range input to generate an isolated and regulated high-efficiency output with high power density.
RECOM RTC2 series 2 W DC/DC converters
01 February, 2017RECOM's 2 W RTC2 series come in a six-pin SMD open-frame package with a footprint of less than one-third of a square inch.
Rohde & Schwarz R&S NRP18S three-path diode power sensor
01 February, 2017The R&S NRP18S three-path diode power sensor is a self-contained, fully characterised instrument that can be operated with the R&S NRP2 base unit, with a laptop/PC via USB and with many Rohde & Schwarz instruments (eg, signal generators, signal and spectrum analysers, network analysers).