Silicon can harvest energy from heat
09 September, 2019Silicon's ability to harvest energy from heat can be greatly increased while remaining mass-producible.
The need for ultra-wide input range DC/DC converters
01 September, 2019 by Steve Roberts, RECOMDC/DC converters are used in almost every industrial, medical and transport installation, from low-power test and measurement through to high-power motor driver applications.
MORNSUN URB/VRB-J(M)D/T-3W ultrathin DC/DC converters
19 July, 2019The 3 W series offers both 4:1 and 2:1 ultrawide input voltage ranges, in surface mount and DIP mounting, with 1500 VDC isolation voltage and efficiencies up to 83%.
Technology Dynamics TTST-5000 Series DC-DC converters
23 May, 2019Technology Dynamics has introduced the TTST-5000 Series of high DC input voltage DC-DC converters. The series features an input range of 375–420 VDC, making it suitable for harsh industrial, railway, military, automation, specialty vehicle, scientific and telecom applications.
Low-profile DC-DC power modules feature 99% efficiency
01 April, 2019RECOM has introduced a new series of DC-DC converter modules which are compatible with the DOSA footprint, and which operate at very high efficiency of up to 99% to enable operation without a heat-sink.
Vicor DCM 3623 ChiP DC-DC converters
18 February, 2019The latest entries in Vicor's DCM family are available in the 3623 (36 x 23 mm) ChiP (Converter housed in Package) format with a power density of 63 W/cm3.
Technology Dynamics NTDC series DC-DC converters
04 February, 2019Technology Dynamics' NTDC series of high-power DC-DC converters provides highly regulated DC output power from 2000–3000 W.
RECOM REC15E-Z series 4:1 input DC/DC converters
25 January, 2019RECOM's REC15E-Z series of 15 W isolated DC/DC converters features wide input ranges in a 1″ x 1″ case size. This is intended to save PCB space, while the wide input ranges increase flexibility by accepting several standard bus voltages.
MORNSUN R3 series dual isolated regulated output DC/DC converters
21 January, 2019MORNSUN has added four series of DC converters, all with dual isolated regulated outputs, to the R3 DC/DC wide-input converter family.
MORNSUN URB_S-10WR3 and VRB_S-10WR3 series R3 DC/DC converters
01 October, 2018The 10 W URB_S-10WR3 and VRB_S-10WR3 series DC/DC converters offer a 4:1 and 2:1 wide input voltage range (9–36 V) and are available with regulated output voltages of 3.3, 5, 9, 12, 15 and 24 VDC.
RECOM RKZE series DC/DC converters
04 September, 2018RECOM has released the RKZE series, a solution for applications that require high isolation and operate in wide temperature ranges.
MORNSUN K78xx-2000R3 non-isolated DC/DC converter series
01 September, 2018MORNSUN's switching regulator K78xx-2000R3 series is rated at 2 A in addition to the non-isolated DC-DC converter range and designed as a drop-in alternative for traditional 78xx series three-terminal linear regulators.
Advantages of modular DC/DC converters over discrete solutions
01 August, 2018Although it has been known for some time that modular DC/DC converters offer greater efficiency and reliability, their high costs have prevented manufacturers from including them in their designs — especially where large numbers of converters were required.
Mornsun R3 series fixed input DC converters
11 July, 2018Mornsun's R3 series fixed input DC converters offer solutions to common issues with power supply design.
Vicor DCM DC-DC converter modules
10 July, 2018The DCM ChiP (converter housed in package) is a DC-DC converter module that operates from an unregulated, wide range input to generate an isolated, regulated DC output.