Agilent N/W6141A electromagnetic compatibility measurement application
07 September, 2010 byThe N/W6141A electromagnetic compatibility measurement application for Agilent’s X-series of signal analysers is now available.
EMC and petrol engine interference
20 August, 2010For more than a decade now, Australia has had mandatory regulations in place for electromagnetic compatibility (EMC) for the majority of electric and electronic devices.
Em Test ESD 30N tester
19 May, 2010The Em Test model ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
EM Test ESD 30N ESD tester
22 April, 2010 byThe EM Test ESD 30N is an ESD tester for simulating ESD pulses to 30 kV with discharges up to 20 Hz in both air and contact discharge modes.
Westek Electronics MTE RLW series DIN-rail mounting line reactors
19 March, 2010 byThe MTE RLW series DIN-rail mounting line reactors provide other functions in addition to harmonics mitigation on the line side of variable speed drives.
EMC testing
17 June, 2009 byWestek Electronics has released the Langer NNB21 line impedance stabilisation network suitable for motor vehicle conducted interference testing in accordance with CISPR 25/ISO 7637.
EMI test receiver
17 April, 2009 byThe ESL EMI test receiver is designed for cost-conscious users who want to perform precise precompliance and diagnostic measurements up to 3 or 6 GHz.
Static detector
14 April, 2009 byThe goal of an ESD program is to reduce the strength and occurrences of ESD events or electrostatic discharges.
Static detector
01 June, 2008The goal of an ESD program is to reduce the strength and occurrences of ESD events or electrostatic discharges.
SineFormer EMC filters
11 January, 2008Epcos has introduced an output filter for frequency converters.
Global distribution agreement for Mouser and Laird
02 October, 2007Mouser Electronics has signed a global distribution agreement with Laird Technologies, a global manufacturer of electromagnetic interference (EMI) solutions that serve the telecommunications, data communications, computer, general electronics, network equipment, aerospace, defence, automotive, and medical equipment markets.
A series of EMC, safety and compliance courses
13 June, 2007Euro-engineer Keith Armstrong will be in Australia-New Zealand until July 2007 to present a series of up-to-date EMC courses to industry and the public, sponsored by EMC Technologies.
Launch of EMC service
08 June, 2006The directors of Compliance Engineering Pty Ltd have announced the launch of Compliance Engineering in the Australian EMC compliance market.
EMC for functional safety
05 January, 2006 by Keith Armstrong, Cherry Clough Consultants*Electronic technologies are increasingly used in equipment that has an impact on safety. Unfortunately, all electrical and electronic technologies are inherently prone to suffering inaccuracy due to electromagnetic interference (EMI)
Silencing the silent service
05 February, 2005 by Dick Lovegrove, Managing Director, Kingdom Pty LtdIt is well known that the first few Collins class submarines suffered from a higher level of noise emissions at the beginning of their service life than was desirable. The good news is that the early issues are being successfully corrected.