Protection > Shielding

Improve long-term performance of LEDs with protection materials

25 September, 2019

Jade Bridges highlights the use of LEDs in various environments and introduces how to specify appropriate protection under such conditions.


FAQs regarding encapsulation resins/potting compounds

01 August, 2019

Electrolube's Technical Director for Resins, Alistair Little, discusses his top trending encapsulation resin/potting compound questions.


HumiSeal UVA 300 conformal coating

18 July, 2019

HumiSeal's UVA 300 LED cured conformal coating is designed to be cured through simple, single-wavelength LED UV light.


Hetech conformal coating service

10 July, 2019

Hetech can extend the life of a product by providing high-quality conformal coating services, using its conformal coating machine.


Electrolube UVCL range of UV cure conformal coatings

01 July, 2019

Electrolube, the global manufacturer of electrochemicals, developed the UVCL range of UV cure conformal coatings to meet the various requirements of electronics, LED and automotive manufacturers, with the additional benefit of increasing production time and offering higher levels of performance.


Kontron APPROTECT encryption framework

28 June, 2019

Kontron APPROTECT encrypts an application's source code in a way that makes reverse engineering impossible, featuring copy protection, IP protection and protection from reverse engineering and tampering.


Harwin S0911-46R and S0921-46R EMI/RFI shield clips

17 May, 2019

Covering a surface area of 2.3 x 1.2 and with 2 mm height, Harwin's S0911-46R shield can clip is designed to address the demands being set by the latest generation of high-density electronic systems.


Getting the best performance from resin encapsulants

01 May, 2019

In this article on resin potting and encapsulation, resins expert Alistair Little expands on a Q&A guide format with some advice on selection and application.


The positive outcomes of antistatic flooring

08 April, 2019

State-of-the-art technology can achieve incredible things — but only if each and every delicate component and piece of equipment is protected from a wide range of issues.


Dow DOWSIL EI-2888 Primerless Silicone Encapsulant

05 April, 2019

The DOWSIL EI-2888 Primerless Silicone Encapsulant, from Dow, is an optically clear silicone for professional LED lighting that cures at room temperature.


Polyurethane encapsulants — enhanced protection for LEDs in challenging environments

01 April, 2019

The use of an encapsulation resin to protect LEDs has become increasingly common over the past few years.


Electrolube ER2224 thermally conductive encapsulation resin

01 February, 2019

The ER2224 epoxy potting compound is a highly thermally conductive resin (1 W/m•K) that also offers strong thermal cycling properties.


EXAIR Gen4 Super Ion Air Wipe

17 January, 2019

EXAIR's Gen4 Super Ion Air Wipe provides a uniform, 360° ionised airstream that clamps around a continuously moving part to eliminate static electricity and contaminants. It is suitable for removing dust, particulates and personnel shocks on pipe, cable, extruded shapes, hose, wire and more.


EXAIR Gen4 Ionizing Bar

27 November, 2018

EXAIR's Gen4 Ionizing Bar eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem.


Coilcraft 1812CAN Series common-mode chokes

12 November, 2018

Coilcraft's 1812CAN Series common-mode chokes provide noise suppression on CAN (1 Mbps) or CAN FD (5 Mbps) data lines in automotive and industrial automation applications.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd