Test & measure > Instruments

Emona Instruments electronic test and measuring instruments

30 June, 2015

Emona Instruments has released a number of recent electronic test and measuring instruments, such as the MegiQ USB-driven vector network analyser. The fully bidirectional two-port VNA allows detailed impedance measurements of antennas, components and circuits, covering 400 to 4000 MHz.


Keithley Instruments Model 2460 SourceMeter SMU and Model 7510 DMM

23 June, 2015

The Model 2460 SourceMeter source-measure unit (SMU) is the next in a series of interactive SMU bench instruments with a capacitive touch screen. The product adds higher current capacity up to 7 ADC and 7 A pulse compared to the 1 A Model 2450 that was launched in August 2013.


ADLINK PCIe-9814 PCI Express digitiser

28 May, 2015

ADLINK Technology has announced its high-speed PCI Express digitiser, the PCIe-9814, featuring four simultaneously sampled 80 MS/s input channels with 12-bit resolution, 40 MHz bandwidth and up to 1 GB DDR3 onboard memory.


Fluke 5500A multiproduct calibrator

28 May, 2015

The Fluke 5500A multiproduct calibrator can source direct current and voltage, as well as alternating current and voltage comprising multiple waveforms and harmonics. The product has two selectable and simultaneous outputs and will simulate power with phase control, resistance, capacitance, thermocouples and resistance temperature detectors.


Scientific Devices signs distribution deal with Teledyne LeCroy

23 March, 2015

Scientific Devices Australia has recently been appointed as a distributor for the Teledyne LeCroy range of premium test equipment.


Transmille Model 1000 Series Calibrator

05 March, 2015

The Transmille Model 1000 Series Calibrator is said to feature the latest in cutting-edge digital and analog electronics, combined with the latest manufacturing techniques. The ultraportable, full-function calibrator is suitable for DMMs, clamp meters, insulation testers, pressure meters, and temperature and process control meters.


Anritsu MT8852B Bluetooth Test Set with v4.2 BLE Data Length Extension

01 January, 2015

Anritsu introduces an option for its MT8852B Bluetooth Test Set that supports the Data Length Extension associated with Bluetooth Low Energy (BLE) as part of the latest Bluetooth Core Specification version 4.2.


Distributed measurement systems

04 November, 2014

In almost every industry, traditional centralised data acquisition systems are being replaced with a more distributed network of measurement devices. This trend has recently been combined with the evolution of computing into the cloud that will continue to change not only how we acquire data, but also how we store, access and analyse it.


Spectrum M4i series digitiser cards firmware options

02 September, 2014

Using hardware-based data analysis and reduction technology, Spectrum has created firmware options that allow its high-speed M4i series digitiser cards to perform peak detection and output the corresponding statistical data.


Anritsu Network Master Pro MT1000A network transport tester

01 September, 2014

As network operators install technologies such as OTN, MPLS-TP and Ethernet in their metro and backhaul networks, the operator needs to support fibre channel links while continuing to maintain legacy PDH and SDH networks. The Network Master Pro MT1000A brings these network test requirements to a portable device, making it a suitable tool for field testing.


National Instruments VirtualBench all-in-one instrument

03 August, 2014

NI has announced VirtualBench, an all-in-one instrument that integrates a mixed-signal oscilloscope, function generator, digital multimeter, programmable DC power supply and digital I/O. Users interact with the product through software applications that run on PCs or iPads.


Copper Mountain Technologies S7530 75Ω vector network analyser

12 July, 2014

Copper Mountain Technologies' S7530, a 75Ω compact vector network analyser, is suitable for cable and satellite TV industries, including equipment development and manufacturing.


Rohde & Schwarz ZNBT8 multiport vector network analyser

01 July, 2014

The R&S ZNBT8 is claimed to be the first multiport vector network analyser offering up to 24 integrated test ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports.


American Sensor Technologies AST4530 submersible pressure transducer

02 June, 2014

The AST4530 submersible pressure transducer is constructed using PVDF material and a PTFE diaphragm. Designed to measure liquid level of harsh liquids, the product features a submersible PVDF cable, cord grip and housing.


Gamry Interface 1000 potentiostat

03 March, 2014

The Interface 1000 is a potentiostat/galvanostat/ZRA for use in general electrochemistry applications. It is suitable for corrosion measurements, battery testing, sensor development and physical electrochemistry. The product features nine current ranges and three gain stages, and covers everything from corrosion to batteries and sensors to supercaps. It has a full 1 A of current up to the compliance limit of ±20 V.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd